CSC/ECE 506 Spring 2012/ch2b cm

Take a modern GPU architecture, and use it as an example in explaining how data-parallel programming is done. Do this in a discussion similar to the discussion of the hypothetical array processor in Lecture 3. That is, describe the problem, then describe the instructions of the GPU, and show code for how the problem can be solved efficiently using GPU instructions. You might want to use multiple examples to illustrate different facilities of a GPU instruction set.

Introduction

This article provides an overview of NVidia GeForce architecture and NVidia CUDA parallel programming model. It also provides a brief discussion of the commonly encountered problems that necessitate the application of these techniques. These examples should also emphasize the specific facilities made available by recent GPU architectures, for developing parallel programs.

Why GPUs

If we look at the modern CPUs and GPUs, and compare their performance (in terms of floating point capability) (-link-), we notice that GPUs clearly outclass their competitors by a huge margin. This is because GPU is specialized for compute-intensive, highly parallel computation – which is what graphics rendering is all about – and therefore designed such that more transistors are devoted to data processing rather than data caching and flow control.

Problem

Consider the problem of computing addition of two vectors and storing the result into a third vector. A standard C program to achieve this would look like this:

int main()
{
	float A[1000],B[1000],C[1000];
	.....	
	//Some initializations
	.....

	for(int i = 0; i < 1000; i++)
		C[i] = A[i] + B[i];

	......
}

Here we are executing the for loop, once for each array index. On a sequential processor (Single core processor),the instructions similar to the following are executed for each run of the for loop.

Fetch i
Fetch A[i] into Register EAX
Fetch B[i] into Register EBX
Add EBX to EAX
Store EAX into Adress of C[i]

Hence the time taken to perform this simple computation is linear in the size of the input. This could manifest as a major bottleneck in real time applications such as 3D renderings, Face recognition, Monte Carlo simulation,etc where the input to be processed is embarrassingly large.

Solution

The pattern that exists in all of these problems is that, there's one instruction or a single set of instructions that act on a large amount of distinct data elements (SIMD - link). This is a typical pattern where data parallelism can be applied.

In a two processor (or two core) system, we could have both the processing units (cores) work on a part of the array simultaneously. Following snippet is a rough outline of how this could be achieved:

.....
    if CPU = "a"
       lower_limit := 0
       upper_limit := round(A.length/2)
    else if CPU = "b"
       lower_limit := round(A.length/2) + 1
       upper_limit := A.length

for i from lower_limit to upper_limit by 1
   C[i] = A[i] + B[i];
.....

This is typically done in high level programming languages such as C using the Thread(-link-) abstraction, where each thread runs simultaneously on a different processing unit. Even though this solution is much faster, it is still limited to just two parallel executions.

CUDA solution

Because the same program (set of instructions) is executed for each data element, there is a lower requirement for sophisticated flow control, and because it is executed on many data elements, it exhibits high arithmetic intensity. GPU is specialized for compute-intensive, highly parallel computation – exactly what graphics rendering is about – and therefore designed such that more transistors are devoted to data processing rather than data caching and flow control. Hence GPU (more specifically CUDA) would be the best answer to such a problem.

Similar to what we did with the two processor, multi-threaded solution, CUDA enables us to create thousands of threads and run them parallely on thousands of Processing units that GPU provides. Following C program illustrates how this can be achieved:

__global__ void VecAdd(float* A, float* B, float* C)
{
	int i = threadIdx.x;
	C[i] = A[i] + B[i];
}

int main()
{
	...
	// Invocation with N threads
	VecAdd<<<1, 1000>>>(A, B, C);
	...
}

In this code, the main function simply calls a specialized routine (called Kernel (-link-)), and passes in the 3 arrays that need to be processed parallely. It also informs the CUDA runtime (-link-) to create 1000 threads, where each thread runs the same VecAdd routine, but on different data. As can be seen from the code, in the VecAdd routine, we are finding the thread index and acting only on that index of the input arrays. Hence each of the 1000 threads acts on a different location and performs the computation. This helps us achieve exponential performance improvements, which becomes evident when dealing with super-parallel applications such as those mentioned above.

Example2 illustrating more CUDA features/instructions

Let us increase slightly the complexity of the above problem. Consider the program that adds two NxN matrices. A simple CPU program to achieve this may look like this:

void add_matrix( float* a, float* b, float* c, int N ) 
{ 
	int index; 
	for ( int i = 0; i < N; ++i ) 
	for ( int j = 0; j < N; ++j ) 
	{ 
		index = i + j*N; 
		c[index] = a[index] + b[index]; 
	} 
} 
 
int main() 
{
    add_matrix( a, b, c, N );
}

In case of CUDA, it provides a hierarchy of threads, where-in a number of threads can be grouped together in to a Block. A number of blocks can be arranged to form a Grid of threads. The way CUDA architecture and Runtime is designed, enables us to form one-dimensional, two-dimensional, or three-dimensional thread blocks. This provides a natural way to invoke computation across the elements in a domain such as a vector, matrix, or volume respectively.

In order to achieve data parallelism in 2D or 3D, we have to exploit the 3 components of the threadIdx variable, which is unique to each thread. For a two-dimensional block of size (Dx, Dy), the thread ID of a thread of index (x, y) is (x + y Dx); for a three-dimensional block of size (Dx, Dy, Dz), the thread ID of a thread of index (x, y, z) is (x + y Dx + z Dx Dy). Based on this idea, the following code adds two NxN matrices in parallel:

__global__ void MatAdd(float A[N][N], float B[N][N],float C[N][N])
{
	int i = threadIdx.x;
	int j = threadIdx.y;
	C[i][j] = A[i][j] + B[i][j];
}
int main()
{
	...
	// Invocation with one block of N * N * 1 threads
	int numBlocks = 1;
	dim3 threadsPerBlock(N, N);
	MatAdd<<<numBlocks, threadsPerBlock>>>(A, B, C);
	...
}

Other well known Applications

Password guessing 3D rendering,etc http://www.infoworld.com/d/developer-world/gpu-computing-about-massive-data-parallelism-263