User:Ewhorton
Expertiza is a web application where students can submit and peer-review learning objects (articles, code, web sites, etc). It is used in select courses at NC State and by professors at several other colleges and universities. <ref>Expertiza on GitHub</ref>
Introduction
Our contribution to this project is a suite of functional tests for the assignment calibration function. These tests are designed to provide integration, regression, and acceptance testing by using automation technologies.
Problem Statement
Expertiza has a feature called Calibration that can be turned on for an assignment. When this feature is enabled an expert, typically the instructor, can provide an expert review for the assignment artifacts. After students finish their own reviews they may compare their responses to the expert review. The instructor may also view calibration results to view the scores for the entire class.
While this is a preexisting feature within Expertiza, there currently exist no tests for it. The goal of this project is to fully test the entire flow of the calibration feature using the RSpec and Capybara frameworks.
Motivation
Once the application is built, it is necessary to test its functionality. More importantly, it is essential to test the functionality from users perspective. Feature spec allows testing of your application's functionality from the outside either by simulating a browser or by headless browser simulation. By manually clicking on the interface, the tests can discover bugs in the system and so has ours.
Flow of the calibration function
Before analyzing code, one must familiarize themselves with the steps involved in assignment submission by student on Expertiza. The steps involved are:
- Login with valid instructor username and password
- Click on "Assignment"
- Click on "New public assignment"
- Input all the information needed, check the “Calibrated peer-review for training?” box, click on Create
- Select the review rubric in “Rubrics” tab
- Go to “Due dates” tab, make sure that this assignment is currently in Review phase, also, make the submission allowed in review phase.
- Go to the list of assignments, click “edit” icon of the assignment
- Go to the “Calibration” tab, click on the "Begin" link next to the student artifact for the expert review, and click “Submit Review”
- Go to “Review strategy” tab, select Instructor-Selected as review strategy, then select the radio button “Set number of reviews done by each student” and input the number of reviews
- Login with valid student username and password who is a reviewer for the assignment
- Click on the assignment
- Click on“Other’s work”
- After clicking “Begin”, Expertiza will display peer-review page
- Click “Submit Review”
- Click “Show calibration results” to see expert review
- Login with valid instructor username and password
- Click on "Assignment"
- Click on the “view review report” to see the calibration report
Creating the Tests
Gems involved
The gems used in feature testing are rspec-rails, capybara and selenium.
rspec-rails
Rspec-rails is a testing framework for Rails 3.x and 4.x. It supports testing of models, controllers, requests, features, views and routes. It does this by accepting test scenarios called specs.<ref>rpsce-rails on GitHub</ref>
capybara
Capybara helps you test web applications by simulating how a real user would interact with your application. It comes with built in Rack::Test and Selenium support. WebKit is supported through an external gem.<ref>capybara on GitHub</ref> To control the environments in which the scenarios are run, it provides before and after hooks.<ref>Before and after hooks</ref>
- before(:each) blocks are run before each scenario in the group
- before(:all) blocks are run once before all of the scenarios in the group
- after(:each) blocks are run after each scenario in the group
- after(:all) blocks are run once after all of the scenarios in the group
selenium
Selenium is a portable software testing framework for web applications. Selenium provides a record/playback tool for authoring tests without learning a test scripting language (Selenium IDE). It is the default javascript webdriver for Capybara.
Test Scenarios
Based on the steps involved in manual submission of the assignment, the following test scenarios are considered:
Scenario to check whether student is able to login
- Login with student13 and password
- Click on Sign In button
- Updated page should have text content Assignment
Scenario to check whether student is able to submit valid link to an ongoing assignment
- Login with student13 and password
- Click on Sign In button
- Click on OnGoing Assignment
- Click on Your work
- Upload link http://www.csc.ncsu.edu/faculty/efg/517/f15/schedule
- Updated page should have link http://www.csc.ncsu.edu/faculty/efg/517/f15/schedule
Scenario to check whether student is not able submit invalid link to an ongoing assignment
- Login with student13 and password
- Click on Sign In button
- Click on OnGoing Assignment
- Click on Your work
- Upload link http://
- Updated page should display flash message with text URI is not valid
Scenario to check whether student is able to upload a file to an ongoing assignment
- Login with student13 and password
- Click on Sign In button
- Click on OnGoing Assignment
- Click on Your work
- Upload file student_submission_spec.rb
- Updated page should contain filename student_submission_spec.rb
Scenario to check whether student is able to upload valid link and a file to an ongoing assignment
- Login with student13 and password
- Click on Sign In button
- Click on OnGoing Assignment
- Click on Your work
- Upload link http://www.csc.ncsu.edu/faculty/efg/517/f15/assignments
- Upload file users_spec.rb
- Updated page should have link http://www.csc.ncsu.edu/faculty/efg/517/f15/assignments
- Updated page should contain filename users_spec.rb
Scenario to check whether student is not able submit valid link to a finished assignment
- Login with student13 and password
- Click on Sign In button
- Click on Finished Assignment
- Click on Your work
- Page should not have Upload link button
Scenario to check whether student is able upload file to a finished assignment
- Login with student13 and password
- Click on Sign In button
- Click on Finished Assignment
- Click on Your work
- Upload file student_submission_spec.rb
- Updated page should contain filename student_submission_spec.rb
Code
Code for the feature test consist in two files:
- assignment_setup.rb which contains method for creating assignments using controller calls.
- student_assignment_submission.rb which contain calls to assignment_setup, scenarios to test assignment submission and commands to delete the created assignments.
Structure
require files
RSpec.feature 'assignment submission when student' do
- before(:all) do
- create assignments for submission
- end
- before(:each) do
- capybara steps to login
- end
- after(:all) do
- delete assignments created
- end
- scenario 'submits only valid link to ongoing assignment' do
- mock steps using capybara
- make assertions
- end
- ....
- ....
- ....
end
Sample Scenario
require 'rails_helper'
require 'spec_helper'
require 'assignment_setup'
RSpec.feature 'assignment submission when student' do
active_assignment="FeatureTest"
expired_assignment="LibraryRailsApp"
d = Date.parse(Time.now.to_s)
due_date1=(d >> 1).strftime("%Y-%m-%d %H:%M:00")
due_date2=(d << 1).strftime("%Y-%m-%d %H:%M:00")
# Before all block runs once before all the scenarios are tested
before(:all) do
# Create active/ongoing assignment
create_assignment(active_assignment, due_date1)
# Create expired/finished assignment
create_assignment(expired_assignment, due_date2)
end
# Before each block runs before every scenario
before(:each) do
# Login as a student before each scenario
visit root_path
fill_in 'User Name', :with => 'student13'
fill_in 'Password', :with => 'password'
click_on 'SIGN IN'
end
# After all block runs after all the scenarios are tested
after(:all)do
# Delete active/ongoing assignment created by the test
assignment = Assignment.find_by_name(active_assignment)
assignment.delete
# Delete expired/finished assignment created by the test
assignment = Assignment.find_by_name(expired_assignment)
assignment.delete
end
# Scenario to check whether student is able to submit valid link to an ongoing assignment
scenario 'submits only valid link to ongoing assignment' do
click_on active_assignment
click_on 'Your work'
fill_in 'submission', :with => 'http://www.csc.ncsu.edu/faculty/efg/517/f15/schedule'
click_on 'Upload link'
expect(page).to have_content 'http://www.csc.ncsu.edu/faculty/efg/517/f15/schedule'
end
end
Running the tests
The following are steps required to run the test
- Clone the repository in a new directory
$ mkdir review $ cd review $ git clone https://github.com/shrenujgandhi/expertiza.git
In case you don't have a database with student and instructor entries then download the dump from https://drive.google.com/a/ncsu.edu/file/d/0B2vDvVjH76uESEkzSWpJRnhGbmc/view. Extract its contents.
$ cd expertiza $ rake db:create:all $ cd Downloads/ $ mysql -u root -p expertiza_development < expertiza_scrubbed_2015_08_14.sql password: $ cd expertiza $ rake db:migrate
- Type the command to run tests for assignment submission
rspec spec/features/student_submission_spec.rb
Test Results
The following screenshot shows the result of the rspec command.
Test Analysis
- 7 examples, 0 failures imply that there are 7 test scenarios and none of them failed.
- The tests take around 35 seconds to run, which implies that they are fast.
- They are also repeatable as the assignments that are created in the before all block are also deleted in the after all block.
- They are also self-verifying as all the results are in green, which mean that all the cases passed.
Project Resources
References
<references></references>