CSC/ECE 506 Fall 2007/wiki1 4 la: Difference between revisions
| Line 10: | Line 10: | ||
Two technologies appeard in the 2000's that altered the microprocessor performance race. The first is ''Multiple Cores'' on chip and the second is ''Simultaneous Multi-Threading (SMT)'' (also known as ''Hyper-Threading''). Industry refrained at this point from using the clock speed as the performance metric since a microprocessor encompassed many more intertwined technologies than merely speeding up the clock cycle. The industry has seen two cores on a single chip. Then, it saw cores taking advantage of SMT. The number of cores and the number of threads exploited in a microprocessor are ever increasing. Both core and thread technologies are increasing in the number of threads they are able to support. Dual core processors and dual thread processors are already in existence with the promise to merge both technologies so each core can support two threads. There are microprocessors in existence today with four and eight cores, with the promise of sixteen cores on a single chip to be made in a matter of months. | Two technologies appeard in the 2000's that altered the microprocessor performance race. The first is ''Multiple Cores'' on chip and the second is ''Simultaneous Multi-Threading (SMT)'' (also known as ''Hyper-Threading''). Industry refrained at this point from using the clock speed as the performance metric since a microprocessor encompassed many more intertwined technologies than merely speeding up the clock cycle. The industry has seen two cores on a single chip. Then, it saw cores taking advantage of SMT. The number of cores and the number of threads exploited in a microprocessor are ever increasing. Both core and thread technologies are increasing in the number of threads they are able to support. Dual core processors and dual thread processors are already in existence with the promise to merge both technologies so each core can support two threads. There are microprocessors in existence today with four and eight cores, with the promise of sixteen cores on a single chip to be made in a matter of months. | ||
In the PC system world, throughout the 1990's and early 2000's, increasing chip clock speed was the standard way to increase system performance. Desktop processors topped 1GHz clock speeds in 2000, 2GHz in 2001, and topped 3GHz in 2002. But, due to power demands and heat concerns, this trend has since been discontinued. Design obstacles, especially in laptop computers, meant that other methods had to be pursued in order to increase processing power without losing efficiency. The ''Multi-Core'' era was then introduced to the PC world. In the spring of 2005, dual-core chips were introduced by Intel and then by AMD. Quad-core processors have reached the market, and octal-cores may hit the market by 2009. | |||
In 2002, Intel released the Itanium microprocessor, which takes advantage of explicit ''instruction-level parallelism''. The compiler makes decisions about which instructions to execute in parallel, allowing the processor to execute up to six instructions per clock cycle. Although the original (and several subsequent) Itanium processors contained a single core, In 2006, Intel released an Itanium dual core microprocessor. The future of the Itanium family will follow the trend of most other microprocessors, in that ''thread-level parallelism'' will be exploited via multi-core chips. | |||
==System Design Trends== | ==System Design Trends== | ||
Revision as of 20:10, 5 September 2007
Update section 1.1.3: Architectural Trends
Microprocessor Design Trends
The textbook discusses that up to 1986, advancement in microprocessors were dominated by bit-level parallelism. It started with 4-bit datapaths, followed by 8-bit, 16-bit and 32-bit wide datapaths. In server design, the norm has been established to be at 64-bit since the start of the millennium. A 128-bit datapath is rarely mentioned to be used in microprocessors. However, graphics processors have been using 128-bit wide datapaths and it is possible to see an increase to 256-bit wide datapaths soon, especially with the advancements in computer graphics, animations and gaming.
Instruction-level parallelism took off as advancements in bit-level parallelism receded. After all, the benefits possible by advancements in bit-level parallelism are limited to the ability to address more storage space and the ability to do more in a single cycle. The latter benefit has been limited to more precise floating point calculation although some microprocessors have the ability to bundle a couple of instructions into one.
The period within the 1980's and 1990's indeed set the stage for the modern microprocessor. Superscalar microprocessors were created, which encompassed branch predictors, out-of-order execution, deeper and larger levels of cache on chip, cache coherency protocols and the ability to communicate with other microprocessors on chip. Research done in the 1990's and early 2000's set the stage for the next level of parallelism to be exploited: thread-level parallelism.
Two technologies appeard in the 2000's that altered the microprocessor performance race. The first is Multiple Cores on chip and the second is Simultaneous Multi-Threading (SMT) (also known as Hyper-Threading). Industry refrained at this point from using the clock speed as the performance metric since a microprocessor encompassed many more intertwined technologies than merely speeding up the clock cycle. The industry has seen two cores on a single chip. Then, it saw cores taking advantage of SMT. The number of cores and the number of threads exploited in a microprocessor are ever increasing. Both core and thread technologies are increasing in the number of threads they are able to support. Dual core processors and dual thread processors are already in existence with the promise to merge both technologies so each core can support two threads. There are microprocessors in existence today with four and eight cores, with the promise of sixteen cores on a single chip to be made in a matter of months.
In the PC system world, throughout the 1990's and early 2000's, increasing chip clock speed was the standard way to increase system performance. Desktop processors topped 1GHz clock speeds in 2000, 2GHz in 2001, and topped 3GHz in 2002. But, due to power demands and heat concerns, this trend has since been discontinued. Design obstacles, especially in laptop computers, meant that other methods had to be pursued in order to increase processing power without losing efficiency. The Multi-Core era was then introduced to the PC world. In the spring of 2005, dual-core chips were introduced by Intel and then by AMD. Quad-core processors have reached the market, and octal-cores may hit the market by 2009.
In 2002, Intel released the Itanium microprocessor, which takes advantage of explicit instruction-level parallelism. The compiler makes decisions about which instructions to execute in parallel, allowing the processor to execute up to six instructions per clock cycle. Although the original (and several subsequent) Itanium processors contained a single core, In 2006, Intel released an Itanium dual core microprocessor. The future of the Itanium family will follow the trend of most other microprocessors, in that thread-level parallelism will be exploited via multi-core chips.
System Design Trends
Figures
http://upload.wikimedia.org/wikipedia/commons/3/32/Procs.JPG http://upload.wikimedia.org/wikipedia/commons/5/5e/Bandwidth.JPG
References
http://www.endian.net/details.aspx?ItemNo=655 http://www-05.ibm.com/se/news/sv/2007/05/power-timeline.html http://www-03.ibm.com/servers/eserver/pseries/hardware/whitepapers/power/ppc_arch.html http://www.theinquirer.net/?article=9235 http://www.sun.com/processors/