CSC/ECE 506 Fall 2007/wiki4 001 a1: Difference between revisions

From Expertiza_Wiki
Jump to navigation Jump to search
No edit summary
Line 8: Line 8:
[[Image:ethernet.jpg]]
[[Image:ethernet.jpg]]


Ethernet is defined by IEEE Standard 802.3. It is implemented by networking protocols that allow 1GB of data to be transfered at a speed of up to 1 GB per second. 1 GB Ethernet is currently being replaced in the marketplace with the faster 10GB Ethernet. The standard defines the use of data frame collision detection rather than collision avoidance. CSMA/CD is used to describe the method Ethernet protocols allow communication. This stands for Carrier Sense Multiple Access with Collision Detection. If two stations operating Gigabit Ethernet send data frames which collide, a jam signal indicates a collision and the two sending nodes wait for a timer to expire and attempt to resend the frame. Each time a collision occurs, the timer at each node is set to a random value between 0 and 2^(k-1), where k is the number of collisions for a particular transmission. CSMA/CD shared medium Ethernet
Ethernet is defined by IEEE Standard 802.3. It is implemented by networking protocols that allow 1GB of data to be transfered at a speed of up to 1 GB per second. 1 GB Ethernet is currently being replaced in the marketplace with the faster 10GB Ethernet. The standard defines the use of data frame collision detection rather than collision avoidance. CSMA/CD is used to describe the method Ethernet protocols allow communication. This stands for Carrier Sense Multiple Access with Collision Detection. If two stations operating Gigabit Ethernet send data frames which collide, the following protocol is followed according to Standard 802.3:  
Ethernet originally used a shared coaxial cable (the shared medium) winding around a building or campus to every attached machine. A scheme known as carrier sense multiple access with collision detection (CSMA/CD) governed the way the computers shared the channel. This scheme was simpler than the competing token ring or token bus technologies. When a computer wanted to send some information, it used the following algorithm:


  Main procedure
  Main procedure

Revision as of 22:04, 28 November 2007

Current Supercomputer Interconnect Topologies


Gigabit Ethernet

Ethernet is defined by IEEE Standard 802.3. It is implemented by networking protocols that allow 1GB of data to be transfered at a speed of up to 1 GB per second. 1 GB Ethernet is currently being replaced in the marketplace with the faster 10GB Ethernet. The standard defines the use of data frame collision detection rather than collision avoidance. CSMA/CD is used to describe the method Ethernet protocols allow communication. This stands for Carrier Sense Multiple Access with Collision Detection. If two stations operating Gigabit Ethernet send data frames which collide, the following protocol is followed according to Standard 802.3: 

Main procedure
  1. Frame ready for transmission.
  2. Is medium idle? If not, wait until it becomes ready and wait the interframe gap period (9.6 µs in 10 Mbit/s Ethernet).
  3. Start transmitting.
  4. Does a collision occur? If so, go to collision detected procedure.
  5. Reset retransmission counters and end frame transmission.

Collision detected procedure
  1. Continue transmission until minimum packet time is reached (jam signal) to ensure that all receivers detect the collision.
  2. Increment retransmission counter
  3. Is maximum number of transmission attempts reached? If so, abort transmission.
  4. Calculate and wait random backoff period based on number of collisions.
  5. Re-enter main procedure at stage 1.

Infiniband

Infiniband DDR

Federation

Myrinet

NUMAlink

XT3 Internal Interconnect

Quadrics

Infiniband SDR

Sources

[1] top500.org interconnect usage (Share %), performance statistics (Rmax Sum)

[2]IEEE 802.3 Ethernet Standard

Retrieved from "https://wiki.expertiza.ncsu.edu/index.php?title=CSC/ECE_506_Fall_2007/wiki4_001_a1&oldid=10164"