CSC/ECE 517 Fall 2014/oss E1460 aua: Difference between revisions

From Expertiza_Wiki
Jump to navigation Jump to search
 
(One intermediate revision by one other user not shown)
Line 185: Line 185:
===Code Cleanup===
===Code Cleanup===
----
----
At some places, we found certain statements and variable assignments that were not being used later on in the method or code. We have eliminated such unused statements, so that methods contain only code that is being used later on. This would improve the readability and the maintainability of the code. For example in the code below we eliminated the <b>@quiz_phase</b> and the <b>@num_quizzes_total</b> variables because they were not being used anywhere in the code. Also, since the <b>local</b> variables <b>quiz_due_date, deadline_type_id, participant</b> were not being used anywhere, we could eliminate the entire <b>if</b> block from the code below. We then converted the instance variable <b>participant</b> to a local variable because it was not being used in the corresponding view. While we were refactoring the name list to index we were able to remove a great amount of code that was not needed. This is illustrated well in the example mentioned above for the restful implementation style.
At some places, we found certain statements and variable assignments that were not being used later on in the method or code. We have eliminated such unused statements, so that methods contain only code that is being used later on. This would improve the readability and the maintainability of the code. For example in the code below we eliminated the <b>@quiz_phase</b> and the <b>@num_quizzes_total</b> variables because they were not being used anywhere in the code. Also, since the <b>local</b> variables <b>quiz_due_date, deadline_type_id, participant</b> were not being used anywhere, we could eliminate the entire <b>if</b> block from the code below. We then converted the instance variable <b>participant</b> to a local variable because it was not being used in the corresponding view. This is illustrated well in the example mentioned above for the [http://wiki.expertiza.ncsu.edu/index.php/CSC/ECE_517_Fall_2014/oss_E1460_aua#RESTful_style_implementation RESTful style implementation].


===Following Ruby Style Guidelines (Global Rules)===
===Following Ruby Style Guidelines (Global Rules)===

Latest revision as of 02:46, 6 November 2014

Expertiza - Refactoring StudentQuizController

Expertiza is a web application developed using Ruby on Rails that serves as a peer-review system. The application allows students to submit and peer-review learning objects (articles, code, web sites, etc)<ref>Expertiza on GitHub</ref><ref>Expertiza Wiki Page</ref>. It is an open source project and it's codebase is maintained in GitHub. We are contributing to Expertiza as a part of our Object-Oriented Design and Development's Open-Source Software (OSS) Project. Our goal in this project is to refactor the StudentQuiz controller. In this Wiki Page, we would be explaining the changes that we have made for the same.

Project Description

The StudentQuiz controller consists of methods involved in creating, scoring & recording responses of the quizzes taken by reviewers or students of the other teams with the same topic.
The changes that are needed to be done are described as follows:<ref>GoogleDoc for our project requirements</ref>

  1. Pluralize the class. (StudentQuizzesController)
  2. Rename methods to conform to RESTful style. (e.g. :- Rename the list method to index.)
  3. Reduce the number of instance variables per controller action.
  4. Review Method graded? for boolean zen.
  5. Perform Code cleanup by removing unused code.
  6. Use good Ruby style guidelines in the code.
  7. Split a method performing multiple tasks, into seperate methods.
  8. Fix logical errors in the code.

Modifications made to the Existing Code

Pluralized the class name StudentQuizController


As per the Rails convention the controller class names are suggested to be plural. This helps in generating RESTful routing URI helpers. Also, naming the classes as plural seems intuitive.<ref>Using the Singular or Plural controller and helper names in Rails</ref>. We used the refactor functionality in RubyMine to rename the StudentQuiz controller class to StudentQuizzes.

The following files were modified and/or renamed.

app/controllers/review_mapping_controller.rb
app/controllers/{student_quiz_controller.rb → student_quizzes_controller.rb}
app/helpers/student_quiz_helper.rb
app/helpers/student_quizzes_helper.rb
app/views/questionnaires/view.html.erb
app/views/{student_quiz → student_quizzes}/_quiz_form.html.erb
app/views/{student_quiz → student_quizzes}/_responses.html.erb
app/views/{student_quiz → student_quizzes}/_set_dynamic_quiz.html.erb
app/views/{student_quiz → student_quizzes}/_set_self_quiz.html.erb
app/views/{student_quiz → student_quizzes}/finished_quiz.html.erb
app/views/{student_quiz → student_quizzes}/grade_essays.html.erb
app/views/{student_quiz → student_quizzes}/list.html.erb
app/views/{student_quiz → student_quizzes}/take_quiz.html.erb
app/views/student_task/view.html.erb
app/views/tree_display/actions/_assignments_actions.html.erb
test/functional/{student_quiz_controller_test.rb → student_quizzes_controller_test.rb}
test/test_helper.rb
test/unit/helpers/student_quiz_helper_test.rb
test/unit/helpers/student_quizzes_helper_test.rb

The detailed change-set for this refactor can be seen here.

RESTful style implementation


The purpose of the list method in the StudentQuizzes controller is to list all the quizzes that are available to a particular user for a particular assignment. RESTful guidelines state that a method that returns a list of all available objects, in this case the quizzes, should be named as index. Therefore, we renamed the list method to the index method in the controller and in all the files that had references to the list method of the student_quizzes_controller (For e.g. :- The view finished_quiz.html.erb of the Student Quiz controller, the review_mapping controller.rb etc.).

Before Refactoring :
Method : list

def list
    @participant = AssignmentParticipant.find(params[:id])
    return unless current_user_id?(@participant.user_id)

    @assignment = Assignment.find(@participant.parent_id)

    # Find the current phase that the assignment is in.
    @quiz_phase = @assignment.get_current_stage(AssignmentParticipant.find(params[:id]).topic_id)

    @quiz_mappings = QuizResponseMap.where(reviewer_id: @participant.id)

    # Calculate the number of quizzes that the user has completed so far.
    @num_quizzes_total = @quiz_mappings.size

    @num_quizzes_completed = 0
    @quiz_mappings.each do |map|
      @num_quizzes_completed += 1 if map.response
    end

    if @assignment.staggered_deadline?
      @quiz_mappings.each { |quiz_mapping|
        if @assignment.team_assignment?
          participant = AssignmentTeam.get_first_member(quiz_mapping.reviewee_id)
        else
          participant = quiz_mapping.reviewee
        end

        if !participant.nil? and !participant.topic_id.nil?
          quiz_due_date = TopicDeadline.where(topic_id: participant.topic_id, deadline_type_id: 1).first
        end
      }
      deadline_type_id = DeadlineType.find_by_name('quiz').id
    end
  end
}

After Refactoring :
Method : index

def index
    participant = AssignmentParticipant.find(params[:id])
    return unless current_user_id?(participant.user_id)
    @assignment = Assignment.find(participant.parent_id)
    @quiz_mappings = QuizResponseMap.get_mappings_for_reviewer(participant.id)
end

Instance Variable Reductions


In Rails, the data is shared between the controllers and views through the instance variables. The instance variabIes that are set during the execution a particular controller method are accessible to the view. Excessive usage of this standard method of data sharing between the controller and the view results in increased coupling between them <ref>Decreasing Controller-View Coupling in Rails</ref>. Increased coupling results in several problems, including less maintainability of code, difficulty in code reuse etc. <ref>Disadvantages of Tight Coupling - Wikipedia</ref> Thus, we need to reduce coupling as much as possible and in this case it can be achieved by reducing as many instance variables as possible in the controller. Therefore, we have refactored our code in order to eliminate unnecessary instance variables and to convert all the instance variables to local variables that are not used in the views.

In the take_quiz method, the following instance variables were removed:

  • Changed the quizzes instance variable to a local variable.
  • Eliminated the instance variable assignment which was not being used anywhere.
  • Eliminated the local variable teams which was not being used any where

Before Refactoring

def self.take_quiz assignment_id , reviewer_id
  @quizzes = Array.new
  reviewer = Participant.where(user_id: reviewer_id, parent_id: assignment_id).first
  @assignment = Assignment.find(assignment_id)
  teams = TeamsUser.where(user_id: reviewer_id)
  Team.where(parent_id: assignment_id).each do |quiz_creator|
    unless TeamsUser.find_by_team_id(quiz_creator.id).user_id == reviewer_id
      Questionnaire.where(instructor_id: quiz_creator.id).each do |questionnaire|
        if !@assignment.team_assignment?
          unless QuizResponseMap.where(reviewed_object_id: questionnaire.id, reviewer_id:  reviewer.id).first
            @quizzes.push(questionnaire)
          end
        else unless QuizResponseMap.where(reviewed_object_id: questionnaire.id, reviewer_id:  reviewer_id).first
               @quizzes.push(questionnaire)
             end
        end
      end
    end
  end
  return @quizzes
end

After Refactoring

def self.take_quiz assignment_id , reviewer_id
    quizzes = Array.new
    reviewer = Participant.where(user_id: reviewer_id, parent_id: assignment_id).first
    Team.where(parent_id: assignment_id).each do |quiz_creator|
      unless TeamsUser.find_by_team_id(quiz_creator.id).user_id == reviewer_id
        Questionnaire.where(instructor_id: quiz_creator.id).each do |questionnaire|
          unless QuizResponseMap.where(reviewed_object_id: questionnaire.id, reviewer_id:  reviewer.id).first
            quizzes.push(questionnaire)
          end
        end
      end
    end
    return quizzes
  end

Follow principle of Boolean Zen


In cases where a method only returns a boolean value by evaluating an expression (using the if..else construct), the if..else statement is redundant and can be eliminated. We have a method graded? that does this thing. Thus, we eliminated the if..else construct in the graded? method as it was redundant.<ref>About Boolean Zen</ref>

Before Refactoring
Method : graded?

 def graded?(response, question)
  if Score.where(question_id: question.id, response_id:  response.id).first
    return true
  else
    return false
  end
 end

After Refactoring
Method : graded?

 def graded?(response, question)
  return (Score.where(question_id: question.id, response_id:  response.id).first)
 end

Code Cleanup


At some places, we found certain statements and variable assignments that were not being used later on in the method or code. We have eliminated such unused statements, so that methods contain only code that is being used later on. This would improve the readability and the maintainability of the code. For example in the code below we eliminated the @quiz_phase and the @num_quizzes_total variables because they were not being used anywhere in the code. Also, since the local variables quiz_due_date, deadline_type_id, participant were not being used anywhere, we could eliminate the entire if block from the code below. We then converted the instance variable participant to a local variable because it was not being used in the corresponding view. This is illustrated well in the example mentioned above for the RESTful style implementation.

Following Ruby Style Guidelines (Global Rules)


At many places in the code we found that the Ruby Style Guidelines were not followed. We have refactored the code so that it uses the good code style guidelines. The following are some of the refactorings the we have done:-

Used .eql? instead of "=="


Before Refactoring
Method : finished_quiz

 if score.score == -1 

After Refactoring

 if score.score.eql? -1 

Eliminated the "== true/false" check


Before Refactoring
Method : finished_quiz

 if essay_not_graded == true 

After Refactoring

 if essay_not_graded 

Use `&&` and `||` rather than `and` and `or` to keep boolean precedence


Before Refactoring
Method: record_response

 elsif  correct_answer and params["#{question.id}"] == correct_answer.txt 

After Refactoring
Method: calculate_score

 elsif  correct_answer && params["#{question.id}"]== correct_answer.txt 

Use key: ‘value’, not :key => ‘value’


Before Refactoring
Method: record_response

new_score = Score.new :comments => choice, :question_id => question.id, :response_id => @response.id

After Refactoring
Method: calculate_score

new_score = Score.new comments: choice, question_id: question.id, response_id: response.id

Replace find_by_... with a where command


Before Refactoring
Method: record_response

 if (QuestionType.find_by_question_id question.id).q_type == 'MCC' 

After Refactoring
Method: calculate_score

ques_type = (QuestionType.where( question_id: question.id)).q_type
if ques_type.eql? 'MCC' 

Used .nil? instead of "== nil"


Before Refactoring
Method: record_response

if params["#{question.id}"] == nil

After Refactoring
Method: calculate_score

if params["#{question.id}"].nil?

Used a Boolean variable when that is sufficient


Before Refactoring
Method: record_response

valid = 1
 if valid == 0

After Refactoring
Method: calculate_score

valid = false
 if valid

Use good conditional statements


Using unless is a good practice. But it is not a good practice to use unless and ! within the condition. Instead we could use an if condition itself.

Before Refactoring
Method: record_response

unless new_score.comments != "" && new_score.comments
   valid = false

After Refactoring
Method: calculate_score

if new_score.comments.empty? || new_score.comments.nil?
   valid = false

Use of Routing Helpers


Routing helpers are a simpler alternative to the otherwise complex hard coded URLs which reduce the readability of the code. Routing helpers allow us to declare possible common routes for a given controller. Routing helpers have been implemented since they maintain consistency even if changes are made to the routing paths.

Before Refactoring:
config.rb does not contain a student_quizzes resource
review_mapping_controller.rb

redirect_to :controller => 'student_quizzes', :action => 'index', :id => params[:participant_id]

After Refactoring
config.rb

resources :student_quizzes, :only => [:index]

review_mapping_controller.rb

redirect_to student_quizzes_path(:id => params[:participant_id])

Replace controller method with a model method


Rails 4 conventions dictate the use of a fat model and skinny controller. It is better to place the search function in the model rather than placing it in the controller. The search code belonged to the quiz_response_map model, since it queries that particular table in the database. The code was extracted into the get_mappings_for_reviewer method and placed in the file quiz_response_map.rb. This method was then called from the StudentQuizzes controller. <ref name = "stackoverflow">Fat Models and Skinny Controllers.</ref>

Before Refactoring
student_quizzes_controller.rb
Method : index

 @quiz_mappings = QuizResponseMap.where(reviewer_id: participant.id)


After Refactoring
student_quizzes_controller.rb
Method : index

 @quiz_mappings = QuizResponseMap.get_mappings_for_reviewer(participant.id)


quiz_response_map.rb

def self.get_mappings_for_reviewer(participant_id)
  return QuizResponseMap.where(reviewer_id: participant_id)
end

Changes made in method logic


We have made certain changes in the logic of the methods calculate_score and record_response (previously the code of both these methods was only in record_response) primarily to improve the existing logic and eliminate redundant code. These changes are described as follows:

  • The score variable was already being set to 0 on the loop entry, therefore it was redundant to reset score to zero again. Thus, we eliminated this line of code inside the if statement.

Before Refactoring

questions.each do |question|		
  score = 0		
  if (QuestionType.find_by_question_id question.id).q_type == 'MCC'		
    score = 0

After Refactoring

questions.each do |question|
 score = 0
 if ques_type.eql? 'MCC'
    # Eliminated score = 0 over here

  • The variable correct_answer stored multiple values as the where condition to which it was assigned was returning multiple values. Therefore it seemed more intuitive to rename correct_answer to correct_answers so that it is apparent that it contains multiple values.

Before Refactoring

correct_answer = QuizQuestionChoice.where(question_id: question.id, iscorrect: 1)

After Refactoring

correct_answers = QuizQuestionChoice.where(question_id: question.id, iscorrect: true)

  • The below piece of code found out the question type twice in the same loop. Therefore we extracted it and assigned it to a local variable so that the query is executed only once.

Before Refactoring

# First Query
if (QuestionType.find_by_question_id question.id).q_type == 'MCC'
# Repetition of the query in the same loop
if (QuestionType.find_by_question_id question.id).q_type == 'Essay'

After Refactoring

# Querying only once and assigning it to a local variable ques_type
ques_type = (QuestionType.where( question_id: question.id)).q_type
# Usage 1 of ques_type
if ques_type.eql? 'MCC'
# Usage 2 of ques_type
if ques_type.eql? 'Essay'

  • The new_scores and scores array stored almost the similar values. The scores array contained a copy of the value that the new_scores array contained. Therefore we eliminated the new_scores array and are performing all the operations only on the scores array.

Before Refactoring

# Part 1
new_score = Score.new :comments => choice, :question_id => question.id, :response_id => @response.id

unless new_score.valid?
 valid = 1
end
new_scores.push(new_score)

# Part 2		  
new_scores.each do |score_update|
 score_update.score = score
 scores.push(score_update)
end

After Refactoring

# Part 1
new_score = Score.new comments: choice, question_id: question.id, response_id: response.id

unless new_score.valid?
  valid = false
end
scores.push(new_score)
	
# Part 2		
scores.each do |score_update|
  score_update.score = score
end

  • The logic to compute the final score for a multiple-choice, multiple-correct type of question seemed to be incorrect and therefore we fixed it.

Before Refactoring

# Part 1 of the Scoring Logic
questions.each do |question|
 score = 0
 if (QuestionType.find_by_question_id question.id).q_type == 'MCC'
  score = 0
  if params["#{question.id}"] == nil
   valid = 1
  else
    correct_answer = QuizQuestionChoice.where(question_id: question.id, iscorrect: 1)
    params["#{question.id}"].each do |choice|
    correct_answer.each do |correct|
    if choice == correct.txt
      score += 1
    end

# Part 2 of the scoring logic which seems to award full points even if you marked some extra options apart from marking all correct answers
  unless score == correct_answer.count
   score = 0
  else
   score = 1
  end

After Refactoring

# Part 1 of the Scoring Logic
questions.each do |question|
 score = 0
 correct_answers = QuizQuestionChoice.where(question_id: question.id, iscorrect: true)
 ques_type = (QuestionType.where( question_id: question.id)).q_type
  if ques_type.eql? 'MCC'
     if params["#{question.id}"].nil?
       valid = false
     else
        params["#{question.id}"].each do |choice|
          correct_answers.each do |correct|
          if choice.eql? correct.txt
             score += 1
          end

# Part 2 of the scoring logic - We have also compared the number of options the user selected to the total number of correct answers
if score.eql? correct_answers.count && score == params["#{question.id}"].count
  score = 1
else
  score = 0
end

  • The record_response function was performing two distinct operations : One operation was saving the response to the database and the other was to calculate the score for the questions. We created a new function calculate_score that would calculate the score for the questions and record_response now only performs the task of saving responses to the database. By doing this, we followed the Single Responsibility O-O Design Principle for methods mentioned by Mr. Robert C. Martin which states that "Every software module should have only one reason to change"<ref>O-O Design Principles</ref>

Before Refactoring

def record_response
  @map = ResponseMap.find(params[:map_id])
  @response = Response.new()
  @response.map_id = params[:map_id]
  @response.created_at = DateTime.current
  @response.updated_at = DateTime.current
  @response.save

  @questionnaire = Questionnaire.find(@map.reviewed_object_id)
  scores = Array.new
  new_scores = Array.new
  valid = 0
  questions = Question.where(questionnaire_id: @questionnaire.id)
  questions.each do |question|
    score = 0
    if (QuestionType.find_by_question_id question.id).q_type == 'MCC'
      score = 0
      if params["#{question.id}"] == nil
        valid = 1
      else
        correct_answer = QuizQuestionChoice.where(question_id: question.id, iscorrect: 1)
        params["#{question.id}"].each do |choice|

          correct_answer.each do |correct|
            if choice == correct.txt
              score += 1
            end

          end
          new_score = Score.new :comments => choice, :question_id => question.id, :response_id => @response.id

          unless new_score.valid?
            valid = 1
          end
          new_scores.push(new_score)

        end
        unless score == correct_answer.count
          score = 0
        else
          score = 1
        end
        new_scores.each do |score_update|
          score_update.score = score
          scores.push(score_update)
        end
      end
    else
      score = 0
      correct_answer = QuizQuestionChoice.where(question_id: question.id, iscorrect:  1).first
      if (QuestionType.find_by_question_id question.id).q_type == 'Essay'
        score = -1
      elsif  correct_answer and params["#{question.id}"] == correct_answer.txt
        score = 1
      end
      new_score = Score.new :comments => params["#{question.id}"], :question_id => question.id, :response_id => @response.id, :score => score
      unless new_score.comments != "" && new_score.comments
        valid = 1
      end
      scores.push(new_score)
    end
  end
  if valid == 0
    scores.each do |score|
      score.save
    end
    redirect_to :controller => 'student_quizzes', :action => 'finished_quiz', :map_id => @map.id
  else
    flash[:error] = "Please answer every question."
    redirect_to :action => :take_quiz, :assignment_id => params[:assignment_id], :questionnaire_id => @questionnaire.id
  end

end

After Refactoring

# New record_response method
  def record_response
    map = ResponseMap.find(params[:map_id])
    response = Response.new
    response.map_id = params[:map_id]
    response.created_at = DateTime.current
    response.updated_at = DateTime.current
    response.save

    calculate_score map,response

  end

# New calculate_score
def calculate_score map, response
    questionnaire = Questionnaire.find(map.reviewed_object_id)
    scores = Array.new
    valid = true
    questions = Question.where(questionnaire_id: questionnaire.id)
    questions.each do |question|
      score = 0
      correct_answers = QuizQuestionChoice.where(question_id: question.id, iscorrect: true)
      ques_type = (QuestionType.where( question_id: question.id)).q_type
      if ques_type.eql? 'MCC'
        if params["#{question.id}"].nil?
          valid = false
        else
          params["#{question.id}"].each do |choice|

            correct_answers.each do |correct|
              if choice.eql? correct.txt
                score += 1
              end

            end
            new_score = Score.new comments: choice, question_id: question.id, response_id: response.id

            unless new_score.valid?
              valid = false
            end
            scores.push(new_score)

          end
          if score.eql? correct_answers.count && score == params["#{question.id}"].count
            score = 1
          else
            score = 0
          end
          scores.each do |score_update|
            score_update.score = score
          end
        end
      else
        correct_answer = correct_answers.first
        if ques_type.eql? 'Essay'
          score = -1
        elsif  correct_answer && params["#{question.id}"]== correct_answer.txt
          score = 1
        end
        new_score = Score.new :comments => params["#{question.id}"], :question_id => question.id, :response_id => response.id, :score => score
        if new_score.comments.empty? || new_score.comments.nil?
          valid = false
        end
        scores.push(new_score)
      end
    end
    if valid
      scores.each do |score|
        score.save
      end
      redirect_to :controller => 'student_quizzes', :action => 'finished_quiz', :map_id => map.id
    else
      flash[:error] = "Please answer every question."
      redirect_to :action => :take_quiz, :assignment_id => params[:assignment_id], :questionnaire_id => questionnaire.id
    end
  end

References

<references/>