E1936 Specialized Rubrics: Difference between revisions

From Expertiza_Wiki
Jump to navigation Jump to search
Line 79: Line 79:


[[File:E1936 Specialized Rubric dropdown menu.png]]
[[File:E1936 Specialized Rubric dropdown menu.png]]


=== Previous Work ===
=== Previous Work ===

Revision as of 08:24, 8 April 2019

This wiki page describes the work and goals that have been completed and achieved while implementing Expertiza Project "E1936. Specialized Rubrics for Different Topic Types (e.g., Servo project, refactoring project)" for the CSC/ECE 517 "Object-Oriented Design and Development" class, in the Spring semester of the 2019.

Introduction

This Wiki page is created per CSC/ECE 517: "Object-Oriented Design and Development", Expertiza Project requirements (Spring, 2019).

Our team was assigned the project "E1936. Specialized rubrics for different topic types (e.g., Servo project, refactoring project)". This is an Expertiza project.

In this wiki page we describe the problem to be solved, how we solve that problem, and how we test our solution. We also provide helpful links and contact information for our team.

Project Description

In this section, we discuss the problem we need to solve, the Expertiza feature this problem is related to, what needs to be done to solve the problem (at a high level), and the previous attempt to solve this problem.

Problem Statement

This problem statement summarizes the problem as described in the project description "E1936. Specialized rubrics for different topic types (e.g., Servo project, refactoring project)".

In CSC/ECE 517, there are several types of topics that could be covered in a single class assignment.

  • Code base
    • Expertiza
    • Mozilla
    • etc.
  • Goal
    • Refactoring
    • Testing
    • etc.

However, currently we can only specify one kind of rubric for an assignment. This means that teams working on different topics will be evaluated using the same rubric. With this setup, it's not possible to fine-tune rubrics for different topics - rubrics tend to be overly general.

Feature Description

The feature we will add in this project is a feature to allow rubrics to vary not only by project phase, but also by topic. This allows more flexibility to the instructor when setting up an assignment, so that they can use rubrics better suited to the tasks that students are performing in an assignment.

When this feature is complete, the following scenarios will be possible, and the instructor will be the judge of which scenario is the best fit to the assignment:

  • One rubric for the assignment, period.
  • A different rubric for each phase of the assignment, regardless of what topic different students are working on.
  • A different rubric for each topic, regardless of the phases in the assignment.
  • A different rubric for each phase of the assignment, and within a phase, a different rubric for each topic.

What Needs to be Done

This section summarizes the work as described in the project description "E1936. Specialized rubrics for different topic types (e.g., Servo project, refactoring project)".

  • In assignment#edit page "Rubrics" tab, add a checkbox to specify whether rubric should vary by topic.
  • In assignment#edit page "Topics" tab, add dropdown(s) next to each topic to specify which rubric(s) are associated with the topic.
    • The dropdown(s) should appear only if rubric should vary by topic, per the Rubrics tab.
    • The topic should have a multiple dropdowns (one for each round) only if rubrics vary by round, per the Rubrics tab.
    • By default, the rubric(s) for each course project will be the one(s) specified in “Rubrics” tab.
    • The dropdown value can overwrite the default rubric.
  • Be careful when making changes to the code
    • The signup_sheet_controller should have as little to do as possible with the selection of rubrics.
    • Anything not germane to selecting topics should be in another controller or (more probably) a helper.
  • Create a DB migration to allow rubric to vary by topic as well as by round.

Screenshots

Current screenshot of Rubrics tab for an Assignment (need to add a checkbox to indicate that rubric should vary by topic)


Current screenshot of Topics tab for an Assignment (need to add a way to select rubrics for particular topics)


Proposed screenshot of Rubrics tab for an Assignment


Proposed screenshot of Topics tab for an Assignment

(drop down shown for only one topic here, but final product will have one for each topic)


Previous Work

There was previous attempt to implement this project in the Fall of 2018 semester by different team, but it was rejected due to several reasons. Our team was provided with all relevant information about the design and implementation of the previously attempted project. The following is the list of links with the relevant materials that we have used for better project understanding, determining pros and cons of proposed changes, and identifying any improvements:

  1. Wiki
  2. Pull Request
  3. Video Demo

After reviewing all relevant materials, we concluded that implementation of the project was incomplete and we found two main drawbacks that can be improved:

  • Per project requirement specifications, "The dropdown box should appear only if 'Vary rubric by topic' is selected in the Rubrics tab." This requirement was not met and Vary rubric by topic checkbox in the Rubrics tab was not implemented at all. Therefore, dropdown box with the list of rubrics appears regardless of whether "Vary rubric by topic" is selected or not.
  • The dropdown box includes the list of all possible rubrics including default value. However, this condition can be improved. The dropdown box should list the rubrics that were created by the current user (professor who is logged in). This would allow to shorten the list of possible rubrics dramatically and help to avoid any misunderstanding and confusion while user selects desired rubric for the course project.

We found no further issues with the rest implementation and other project materials. Wiki page is very useful for understading design of proposed changes. However, our team decided to use slightly different approach than adding questionnaire_id in the sign_up_topics table to specify project's topic and its associated rubrics. Please see our Design Strategy for our proposed changes.

Project Implementation

In this section, we propose our solution to the problem, discuss implementation techniques and details, and list the goals we achieved.

We start by analyzing Entity Relationship Diagram where we state the solution to the problem. Further we discuss design strategy by breaking project problem into multiple staged sub-problems and provide solution for each of these sub-problems. We also discuss some implementation details and provide the list of involved files. Finally, we demonstrate how implemented feature can be used by providing How To sub-section.

Entity Relationship Diagram

We would like to propose our solution to the problem by representing Entity Relationship Diagram and discussing how relationship between sign_up_topics and questionnaires tables can be established to associate project's topic with a rubric.

Note that in the existing implementation neither sign_up_topics nor questionnaires tables have relation with each other. Meaning sign_up_topics table has no foreign key that points to the questionnaires table, and equivalently for the questionnaires table, it has no foreign key that points to the sign_up_topics table. This problem would easily be solved if the sign_up_topics and questionnaires tables have many-to-one relationship (which seems to be an appropriate approach since each topic has exactly one rubric). In this case we would create a DB migration to add questionnaire_id in the sign_up_topics. However, this solution is incorrect as we stated in the Previous Work section.

The problem is that each topic has exactly one rubric per specific round. The same topic may have different rubric with various rounds. Therefore, many-to-one relationship would break DB design and would limit to have only one rubric per topic for each round. Hence, the correct is many-to-many relationship between the tables.

To solve this dilemma and properly establish many-to-many relationship between sign_up_topics nor questionnaires tables, we came to the conclusion and can state solution to the core problem of the project:

  • Create new topic_questionnaire table with foreign keys to each of the sign_up_topics and questionnaires tables.

By adding new such table we create many-to-many relationship between sign_up_topics nor questionnaires tables and this would allow project topic to record multiple rubrics per each round. In the following Entity Relationship Diagram we show existing DB design and proposed changes in blue:

Above Entity Relationship Diagram can be interpreted as follows:

  • sign_up_topics table is connected with topic_questionnaire table through many-to-many relationship (i.e., project's topic may have multiple topic questionnaires per each round)
  • topic_questionnaire table is connected with questionnaires tables via many-to-one relationship (i.e., topic questionnaire belongs to exactly one questionnaire)

To illustrate this we can use the following table that reflects new topic_questionnaire table at any point in time:

id topic_id questionnaire_id used_in_round
1 1 1 1
2 1 2 2
3 1 3 3

Above table demonstrates that the same topic with id=1 may have multiple different questionnaires (with id's=1, 2, 3) depending on the round (round 1, 2, 3 and etc).

Design Strategy

As we have concrete understanding of the problem and proposed solution, we would like break this problem into multiple more manageable sub-problems with specific tasks and well-defined solutions to these tasks. Generally, each sub-problem requires modification of one or more files. We would like to propose our Design Strategy as follows:

  • Rubrics tab with "Vary rubric by topic" checkbox
    • File: app/views/assignments/edit/_rubrics.html.erb
    • PROBLEM: There is no way for the user to indicate that rubrics should vary by topic
    • SOLUTION: Add a new checkbox in the rubric tab to indicate whether rubrics vary by topic or not
  • Preparation of the Topics tab
    • File: app/views/assignments/edit.html.erb
    • PROBLEM: We need to add/change content to the Topics tab, but unlike other tabs in the views, it does not have its own partial view to work with
    • SOLUTION: Refactor and move the code dealing with topics into separate app/views/assignments/edit/_topics.html.erb file
  • Topics tab with "Questionnaire" column and review dropdown content
    • File: app/views/assignments/edit/_topics.html.erb
    • PROBLEM: There is no way for the user to select rubric(s) for a particular topic
    • SOLUTION: Add a new column in the topics table for choosing rubric(s)
      • New column only visible if rubrics vary by topic, per Rubrics tab
      • New column has multiple rounds per topic only if rubrics vary by round, per Rubrics tab
      • Default value for any rubric is that rubric which is shown on Rubrics tab
      • Rubric(s) in the dropdown list is/are only those that were created by the currently logged in instructor
    • PROBLEM: The code in app/views/assignments/edit/_rubrics.html.erb includes dropdowns like the ones we need to add for topics, but that code is way too complex for its functionality (too heavy for a view, uses JavaScript)
    • SOLUTION: Use the code in app/views/assignments/edit/_rubrics.html.erb for inspiration and as a base line only
      • Refactor and move as much actual work as possible out into helper methods that are simply called from this view
      • Views are not intended to do heavy lifting
      • Use as little JavaScript as possible, since this is a Ruby On Rails project, not a JS project
  • Find questionnaire for a given assignment/round/topic
  • File: app/helpers/assignment_helper.rb
    • PROBLEM: The assignment_questionnaire method finds a questionnaire for a given assignment/round, and would be a great place to include code to find a questionnaire for a given assignment/round/topic, however the method is not easy to work with
    • SOLUTION: Improve readability of teh assignment_questionnaire method
      • Add comment block at the top describing the purpose and basic strategy of the method
      • Rename 'number' parameter to clarify the purpose of the parameter
    • SOLUTION: Expand functionality of the assignment_questionnaire method
      • Add ability to get assignment questionnaires by topic as well as by round
      • Like round, topic parameter should be optional
  • Test all of the required helpers
  • File: spec/helpers
    • PROBLEM: We are going to add code to the app/helpers/assignment_helper.rb, but this helper does not have an RSpec test suite yet
    • SOLUTION: Add spec/helpers/assignment_helper_spec.rb file
      • Thoroughly test assignment_questionnaire method in the app/helpers/assignment_helper.rb
    • PROBLEM: We may also need to create other helpers or helper methods as we get into the code
    • SOLUTION: Add tests for any newly created helpers or helper methods
  • Core Problem: create relationship between sign_up_topics and questionnaires table through topic_questionnaires table
  • File: db/migrate
    • PROBLEM: Questionnaires (of which rubrics are one type) are not linked to assignment topics
    • SOLUTION: Create a new migration to link rubrics to topics
      • Create a new table named topic_questionnaire with the following fields:
        • id
        • topic_id
        • questionnaire_id
        • used_in_round

Implementation

In this section, we provide selected portions of modified code to illustrate how we implemented the new feature.

[to be populated after coding is complete]

Files Involved

In this section, we list all files that were modified while implementing the new feature.

  • [to be populated after coding is complete]

How To

In this section, we describe how to use the newly implemented feature.

Add a New Rubric

  • [to be populated after coding is complete]

Select a Rubric for a Topic

  • [to be populated after coding is complete]

Project Testing

To test code implementation, correctness of the added feature, verify that the team did not break any existing functionalities in the Expertiza, and ensure that no bugs were introduced in the code, we utilized the following Test Strategy:

  1. Code inspection
  2. Run and pass existing RSpec Tests
  3. Develop New RSpec Tests
  4. Run through live UI to test a feature using Expertiza instance

Rspec Testing

Our strategy for gaining confidence that our code changes did not break anything was as follows:

  • Run all existing RSpec tests on any changed files, after our changes, to ensure that we have not introduced any failures.
  • The commands and results are shown below.
  [to be populated after coding is complete]
  • Write new comprehensive RSpec tests, for all new methods.
  • Run these tests, to ensure that the new code works as intended.
  • The commands and results are shown below.
  [to be populated after coding is complete]
  • The test suite for a single new method is below.
  • There are many such suites in (TODO add filename(s)).
  • This example illustrates our general strategy:
    • test missing input
    • test bad input
    • test various acceptable forms of input
    • test scenarios that lead to "true" and to "false" return values
  [to be populated after coding is complete]

UI Testing

Here we describe UI Testing that has performed. Include Screenshots maybe?

Conclusion

[to be populated after coding is complete]

Useful Links

In this section we provide useful links related to the work that has been completed by our team.

  1. Forked Project Repository
  2. [(add link here) Pull Request]
  3. [(add link here) Video Demonstration of Specialized Rubrics]
  4. [(add link here) Video Demonstration of Passing Rspec Tests]

Team

Contacts

We have 4 (four) members in our team and 1 (one) mentor was also assigned to us. For any project-related questions/concerns please contact us:

  • Aurora Tiffany-Davis - attiffan@ncsu.edu
  • Ginger Balmat - gabalmat@ncsu.edu
  • Joe Hutchinson - jehutch3@ncsu.edu
  • Nikolay Titov - ngtitov@ncsu.edu
  • Zhewei Hu (mentor) - zhu6@ncsu.edu

Contribution Based Inquiry

For any questions or concerns related to the project design, implementation, testing of the feature developed by our team, please contact an engineer who worked closely on the topic of your interest based on the Contribution Assignment Grid we created to keep track of our progress and contribution. Please carbon copy all team members and our mentor in the email.

References

  • Expertiza Web [1]
  • Expertiza on GitHub [2]
  • Expertiza Wiki [3]
  • Rspec Documentation [4]
  • Wiki with Previous Work [5]
  • Pull Request of the Previous Work [6]