CSC/ECE 517 Fall 2012/ch2a 2w31 up

From Expertiza_Wiki
Jump to navigation Jump to search

SaaS - 5.3 - The TDD cycle: red-green-refactor

Introduction

Test Driven Development is an evolutionary approach to software development that requires a developer to write test code before the actual code and then write the minimum code to pass that test. This process is done iteratively to ensure that all units in the application are tested for optimum functionality, both individually and in synergy with others. This produces applications of high quality in less time.

BDD Vs TDD


In order to understand the TDD cycle and the examples clearly, it is important to understand the following concepts:

SEAMS

The concept of CWWWH(code we wish we had) is about a missing piece of code in TDD. In test driven development, we generally write a test and then the implement the functionality. But it may happen that the program which implements a certain feature, is dependent on some other feature which is not yet implemented. That piece of code is named as "CWWWH". The test is supposed to fail in such situation. But it does not because we have a concept called SEAMS which is a technical name assigned by Michael Feather's in his book Working Effectively With Legacy Code<ref>Working Effectively With Legacy Code by Michael Feather</ref> A seam is a place where one can alter the application behavior without editing the actual code. This helps to isolate a code from that of the other code it depends on. A virtual method can be especially useful in legacy code to create a point of extensibility to test code, where we cannot reasonably extract or introduce an interface to allow us to do so.

RSpec

RSpec<ref>RSpec</ref> is a great testing tool, which provides features like :

  • textual descriptions of examples and groups (rspec-core)
  • extension for Rails (rspec-rails)
    If we are testing a rails application specifically (as opposed to an arbitrary Ruby program), we need to be able to simulate
    * posting to an controller action
    * the ability to examine what the expected view
  • extensible expectation language (rspec-expectations), letting an user express expected outcomes of an object.
    Uses instance methods like "should" and "should_not" to check for equivalence, identity, regular expressions, etc.
[1,2,3].should include(1, 2)

RedGreen – Refactor

Add a Test

  • Think about one thing the code should do : The developer identifies a new functionality from the use cases and user stories, which contain detailed requirements and constraints.
  • Capture that thought in a test, which fails  : An automated test case (new or a variant of an existing test) is then written, corresponding to the new feature, taking into consideration all possible inputs, error conditions and outputs. Run all the automated tests. The new test inevitably fails because it is written prior to the implementation of the feature. This validates that the feature is rightly tested and would pass if the feature is implemented correctly, which drives a developer to the next step.

Implement the feature

  • Write the simplest possible code that lets the test pass  : Minimal code is written to make the test pass. The entire functionality need not be implemented in this step. It is not uncommon to see empty methods or methods that simply return a constant value. The code can be improved in the next iterations. Future tests will be written to further define what these methods should do. The only intention of the developer is to write "just enough" code to ensure it meets all the tested requirements and doesn't cause any other tests to fail. <ref>What is Test Driven Development?</ref> Run the tests again. Ideally, all the tests should pass, making the developer confident about the features implemented so far.

Refactor

  • DRY out commonality with other tests : Remove duplication of code wherever possible. Organizational changes can be made as well to make the code appear cleaner so it’s easier to maintain. TDD encourages frequent refactoring. Automated tests can be run to ensure the code refactoring did not break any existing functionality

Iterate

  • Continue with the next thing (new or improvement of a feature), the code should do.
  • Aim to have working code always.

Examples

TMDb : The Movie Database rails application

New Feature : Search TMDb for movies

Controller Action : Setup
  1. Add the route to config/routes.rb :
    To add a new feature to this Rails application, we first add a route, which maps a URL to the controller method <ref>Routing in Rails</ref>

    # Route that posts 'Search TMDb' form
    post '/movies/search_tmdb'

    This route would map to MoviesController#search_tmdb owing to Convention over Configuration, that is, it would post to the search_tmdb "action" in the Movies "controller".

  2. Create an empty view:
    When a controller method is triggered, it gets some user input, does some computation and renders a view. So, the invocation of a controller needs a view to render, which we need to create even though it is not required to be tested. We start with an empty view. "touch" unix command is used to create a file of size 0 bytes.

    touch app/views/movies/search_tmdb.html.haml

    The above creates a view in the right directory with the file name, same as Movie controller's method name. (Convention over Configuration)
    This view can be refined in later iterations and user stories are used to verify if the view has everything that is needed.

  3. Replace fake “hardwired” method in movies_controller.rb with empty method:
    If the method has a default functionality to return an empty list, then replace the method to one that does nothing.

    def search_tmdb
    end

What model method?

It is the responsibility of the model to call TMDb and search for movies. But, no model method exists as yet to do this.
One may wonder that to test the controller's functionality, one has to get the model method working. Nevertheless, that is not required.
Seam is used in this case, to test the code we wish we had(“CWWWH”). Let us call the "non-existent" model method as Movie.find_in_tmdb

Testing plan
  1. Simulate POSTing search form to controller action.
  2. Check that controller action tries to call Movie.find_in_tmdb with the function argument as data from the submitted form. Here, the functionality of the model is not tested, instead the test ensures the controller invokes the right method with the right arguments.
  3. The test will fail (red), because the (empty) controller method doesnʼt call find_in_tmdb.
  4. Fix controller action to make the test pass (green).
Test MoviesController : Code<ref>TMDb : MoviesController Test Code</ref>
require 'spec_helper'
describe MoviesController do
  describe 'searching TMDb' do
    it 'should call the model method that performs TMDb search' do
      Movie.should_receive(:find_in_tmdb).with('hardware')
      post :search_tmdb, {:search_terms => 'hardware'}
    end
  end
end

The above test case for the MoviesController has an 'it' block, which has a string defining what the test is supposed to check. A do-end block to that 'it' has the actual test code.

The line Movie.should_receive(:find_in_tmdb).with('hardware') creates an expectation that the Movie class should receive the find_in_tmdb method call with a particular argument. An assumption is made here, that the user has actually filled in hardware in the search_terms box on the page that says Search for TMDb.

Once the expectation is setup, we simulate the post.

Use of SEAMS in the Example "Search TMDb for movies"

The controller action in this example calls "Movie.find_in_tmdb" (which is the code we wish we had) with data from submitted form. The test fails as the controller is empty and the method doesnʼt call find_in_tmdb. So here the concept of SEAMS comes in. should_receive uses Rubyʼs open classes to create a seam for isolating controller action from behavior of a missing or buggy controller function. Thus it overrides the find_in_tmdb method. Although it does not implement the logic of the method, it checks whether it is being called with the right argument. Even if the actual code for "find_in_tmdb" existed, the method defined in should_receive would have overwritten it. This is something we would need as we would not want to be affected by bugs in some other code that we are not testing. This is an example of stub and everytime a single test case is completed, all the mocks and stubs are automatically refreshed by Rspec. This helps to keep tests independent.

Advantages and Disadvantages

Advantages

ensures the code is tested and enables you to retest your code quickly and easily, since it’s automated.

References

<references/>

See Also

Definition

References

Books