CSC/ECE 517 Fall 2011/ch1 1d gs

From Expertiza_Wiki
Jump to navigation Jump to search

Closures for Statically Typed Languages

Introduction

This Wiki chapter gives an introduction to the language constructs called closures. It explains how they are used and discusses about challenges involved in implementing them in statically typed languages.

Closures

A closure is a kind of routine that can be assigned to a variable or passed as a parameter to another routine. It can access the local state (local variables, parameters, methods, and instance variables) which is visible in the place it was defined.

To rephrase, a closure is a block of code which meets the following three criteria

1. It can be passed around as a value.

2. It can executed on demand by anyone who has that value, at which time.

3. It can refer to variables from the context in which it was created.

Why do we need closures and what are its uses?

DRY(Don't Repeat Yourself) is a popular software development principle, formulated by Andy Hunt and Dave Thomas, which stresses the importance of not duplicating code. Closures help in implementing the DRY principle and make the code easy to maintain.Closures increase considerably the level of a language by mixing access to local variables with remote execution of a set of locally-defined statements.

Lets see an example,

 def paidMore(amount)
 return Proc.new {|e| e.salary > amount}
 end

This function returns a closure, the behavior of which depends on the parameter amount passed to the enclosing function.

Amount can be fixed to a value like below, the variable highPaid contains a block of code (called a Proc in Ruby) that will return whether an employee’s salary is greater than 150.

 highPaid = paidMore(150)
 //Let’s check john’s salary
 john = Employee.new
 john.salary = 200
 print highPaid.call(john)

The expression highPaid.call(john) executes the e.salary > 150 block and prints the result of the execution. As long as a closure lives, all the free variables accessed by it are not eligible for garbage collection. So, the variable amount persists until the closure returned by paidMore does. Hence from the above sample code , it is clear that even if value 150 went out of scope, at the time of issuing the print call , the binding still remains.

The art of getting the best possible results by minimal code and the ease with which a user can use closures makes the latter a big success in Ruby.

A function to determine if an employee is a manager.Using C#, I'd probably write it like this.

public static IList Managers(IList emps) {
   IList result = new ArrayList();
   foreach(Employee e in emps)
     if (e.IsManager) result.Add(e);
   return result;
 }

In a language that has Closures, in this case Ruby, I'd write this.

 def managers(emps)
   return emps.select {|e| e.isManager}
 end

Statically Typed vs Dynamically Typed Languages

A statically typed language performs type checking during compile-time. Statically typed languages include Java , Objective-C ,Pascal etc.Static typing includes earlier detection of programming mistakes (e.g. preventing adding an integer to a Boolean), better documentation in the form of type signatures (e.g. incorporating number and types of arguments when resolving names), increased runtime efficiency (e.g. not all values need to carry a dynamic type), and a better design and development experience (e.g. knowing the type of the receiver, the IDE can present a drop-down menu of all applicable members). However, static typing is too rigid.


A dynamically typed language is when the majority of its type checking is performed at run-time as opposed to that of compile-time. In dynamic typing values have types, but variables do not (a variable can refer to a value of any type) . Dynamically typed languages include Ruby,Smalltalk , Python ,JavaScript etc. Dynamically typed languages are indispensable for dealing with truly dynamic program behavior such as method interception, dynamic loading, mobile code, runtime reflection, but dynamic typing generates run time type errors,and it requires vastly more testing. In dynamically typed languages the method look up happens at run-time known as late binding and allows objects to dynamically alter their behaviour, allowing greater flexibility in the manipulation of objects.


An important fact to note here is that the presence of static typing in a programming language does not necessarily imply the absence of all dynamic typing mechanisms. For example, Java and some other ostensibly statically typed languages, support downcasting and other type operations that depend on runtime type checks, a form of dynamic typing.

Closures in Dynamically Typed Languages

Closures in Ruby

Ruby is one of the languages that provides a very good support for closures. It has four different ways to define and use closures.[1]

Scheme Closures and Scoping

Scheme is a statically scoped [2] dialect of the Lisp programming language invented by Guy Lewis Steele Jr. and Gerald Jay Sussman. It is primarily a functional programming language with very simple syntax based on s-expressions, parenthesized lists in which a prefix operator is followed by its arguments..

Scheme has same scoping as in ruby. Lets see how closures are implemented in scheme

     ; Defines and applies function func using free variable a
      (let* ((a                     ; define a
           1)
      (func                 ; define func
           (lambda () (+ a 0.1))) ; line# 4
      (func))                 ; prints 1.1

The closure on line #4 accesses the free variable a and increments its value by 0.1

   (let* ((a      1)
      (func1   (lambda () (+ a 0.1)))
      (func2    (let* ((a   2))  func1)); Let's change a to 2, to try to make func1 use a=2
             (func2))     ; prints 1.1 from func1

func1 is called by func2, but the value printed by func1 is not influenced by the func2's locally defined value for a.

Closures in Statically Typed Languages[A Challenge, Why?]

There are several factors that prevent pure closure constructs from being implemented in statically typed languages, we will address a few of them.

Closure like constructs in C

Consider C, a statically typed language. A closure-like constructs in C are function pointers.

  /*function pointer definition & initialization*/
    int (*ptr_2_paidMore)(int,char[])=NULL;
  /*Function definition*/
    int paidMore(int threshold, char name[])
    {
         /*Code for looking up employee name 
         Code for retrieving employee salary*/
         if(salary > threshold)
          {
          return 1;
          }
       return 0;		
    } 
    /*Assign address of paidMore to function pointer*/
    ptr_2_paidMore = &paidMore;

Now ptr_2_paidMore can be passed around and called from wherever access to it is available.

  void passPointer(int (*ptr_2_paidMore) (int, char[])
  {
       char name[]="John";
         int isPaidMore = (*ptr_2_paidMore)(150,name);
  }

However, it is very evident from the above example that, unlike its ruby counterpart does not have the flexibility,conciseness and cannot access variables in its lexical context. The function can only act upon the parameters that are passed to it.

Closures in Java

Java already has something close to closures called Anonymous inner classes which are known to be imperfect for a number of reasons[3]

For now the lambda project for Java Closure implementation is trying to capture all final local variables and make 'this' within the lambda expression lexically scoped. Lambda Expressions are anonymous functions, aimed at addressing the bulkiness of anonymous inner classes.

Some examples of lambda expressions:

  #{ -> 42 }
  #{ int x-> x+1 }

The method body can either be a single expression or an ordinary list of statements (like a method body). The return types of lambda are complex return types called SAM'S type[4] which make use of the imperfect anonymous inner classes.

Consider an integer array, the elements on which I would like to perform an operation and copy the contents to an output array.

For Example:

  int temp=0;
  for(i=0;i<sizeof(input);i++)
  {//Perform Some operation  on input[i] and assign to temp
     output[i]=temp;
  }

Suppose the same operation has to be performed on a float array, the code has to be repeated in a statically typed language. In Java at least objects can be manipulated as generic types but primitive types still have the problem.

To an extent repeating the same closure for different types defeats the purpose of a closure.In a dynamically typed language like Ruby this can be accomplished using a single closure.

Java Lexical Scoping for Closures

Java does not want to permit capture of mutable local variables. The reason being that it is quite difficult to write lambda bodies that do not have race conditions. Sometimes the lambda body may be passed outside the current thread and when other threads try to execute the lambda body, race conditions may arise leaving the variables in an inconsistent state.

In short, operating with statically typed variables and assigning static types to closures’ return types, creates overhead and is cumbersome for a pure closure implementation in statically typed language.

Return from Closure

In ruby, the following function (ex2) passes a closure to function ex3. The Closure computes the value of x and returns it.

Considering the following example:

def ex2
   y=2
   ...
  closure=lambda { x = y + 2 }
   ...
  ex3(closure)
   ...
 end

If the same has to be achieved in C/Java, the return statement will be used which would return from the function ex2 and not execute the remaining statements within ex2.

In Ruby a closure iterates through a list of employees and returns either their name, location, skills, salary or role depending on the parameter passed to it.The return value/values of this closure change at runtime depending on the parameter passed to it.

Writing a similar closure in C/Java would require different closures for different return types which obviously makes it a cumbersome task.

Safety

In C, even if a nested function (platform specific, supported by GCC) is written, it cannot access the local variables in the outer function when the function exited.

Consider the following example:

hack (int *array, int size)
    {
      void store (int index, int value)
        { array[index] = value; }
    
      intermediate (store, size);
    }

Here, the function intermediate receives the address of store as an argument. If intermediate calls store, the arguments given to store are used to store into array. But this technique works only so long as the containing function (hack, in this example) does not exit. Also note, if array was a global variable and the above example is rewritten as below it would work fine.

 int *array;
 hack( int size)
 {
        void store (int index, int value)
        { array[index] = value; }
    
        intermediate (store, size);
 }

These are not strictly type-errors but it goes against the safety principles of a statically typed language.

Conclusion

From the above discussion served with examples and arguments made, conclusion can be derived that the closures are really easy to use and maintain in dynamically typed languages and the attempts to clone same kind for statically typed languages has its own challenges ,due to which the success in implementing it for the latter has not come a very long way.

References

[1] Closures: An article about closures in dynamically-typed imperative languages, by Martin Fowler.

[2] Closures (Lambda Expressions) for the Java Programming LanguageClosures for Java by Neal Gafter

[3] A Definition of Closures Neal Gafter

[4] Understanding ruby blocks procs and lambdas Robert Sosinski

[5] An Introduction to Closures in Ruby Sam Danielson

[6] Jos´e de Oliveira Guimar˜aes, Closures for Statically Typed Object-Oriented Languages,ACM SIGPLAN Vol.39(8), August 2004.

[7] An article on Wikipedia about Closures

[8] An article on Wikipedia about Scheme



CSC 517 Fall 2011

Wiki 1 Assignment