CSC/ECE 517 Fall 2010/ch7 7i sr: Difference between revisions

From Expertiza_Wiki
Jump to navigation Jump to search
 
(35 intermediate revisions by the same user not shown)
Line 4: Line 4:
While computer science abstractions are extremely useful, applying them in an engineering context can be particularly difficult for the uninitiated. As a way of managing program complexity, a number of companies have developed languages where graphics, rather than words, convey the programmer’s intents to the computer. The power of images as abstractions is obvious in our age of increasing multi-media, and while there are very old (relatively speaking) graphical programming languages, the field is still relatively sparse.  
While computer science abstractions are extremely useful, applying them in an engineering context can be particularly difficult for the uninitiated. As a way of managing program complexity, a number of companies have developed languages where graphics, rather than words, convey the programmer’s intents to the computer. The power of images as abstractions is obvious in our age of increasing multi-media, and while there are very old (relatively speaking) graphical programming languages, the field is still relatively sparse.  


Why this scarcity of graphical languages? We can not say. In our view the chief advantage of a graphical language is program control “lives” in the spatial structure of the code, rather than in the grammar. For grammar-oriented individuals, and those used to programming languages, this may seem a disadvantage, however, for those more visual oriented, the two-dimensional space proffers a richer palette for creating. The following discussion illustrates how various abstractions are implemented in a few graphical languages. The elegant implementations of threading, of programming to interfaces, of refactoring for simplicity, and maintenance of type-correctness are powerful reasons for engineers and computer scientist alike to utilize graphical means for instructing computers.
Why this scarcity of graphical languages? We can not say. In our view the chief advantage of a graphical language is program control “lives” in the spatial structure of the code, rather than in the grammar. For grammar-oriented individuals, and those used to programming languages, this may seem a disadvantage, however, for those more visually oriented, the two-dimensional space proffers a richer palette for creating. The following discussion illustrates how various abstractions are implemented in a few graphical languages. The elegant implementations of [http://en.wikipedia.org/wiki/Thread_%28computer_science%29 threading], of programming to [http://en.wikipedia.org/wiki/Interface_%28computing%29 interfaces], of [http://en.wikipedia.org/wiki/Code_refactoring refactoring] for simplicity, and maintenance of [http://en.wikipedia.org/wiki/Data_type type]-correctness are powerful reasons for engineers and computer scientist alike to utilize graphical means for instructing computers.


=Languages=
=Languages=
In graphical languages there is one Everest, in comparison to which all other contenders are insignificant. Namely National Instruments' LabVIEW. Owing to this immense asymmetry in the industry, almost all the discussion that follows examines LabVIEW's salient characteristics, and a few words are spent on two other graphical programming environment, MathWorks Simulink, and Northwoods Software's Sanscript.  
In graphical languages there is one Everest, in comparison to which all other contenders are insignificant. Namely National Instruments' [http://www.ni.com/labview/ LabVIEW]. Owing to this immense asymmetry in the industry, almost all the discussion that follows examines LabVIEW's salient characteristics, and a few words are spent on two other graphical programming environment, MathWorks [http://www.mathworks.com/products/simulink/ Simulink], and Northwoods Software's [http://www.sanscript.net/ Sanscript].  


Throughout the web there are numerous definitions of object orientation [1,2,3]. In this discussion we hold the perspective that polymorphism, encapsulation, and inheritance are the core elements of an O-O language or system.
Throughout the web there are numerous definitions of object orientation [http://en.wikipedia.org/wiki/Object-oriented_programming],[http://www.scribd.com/doc/21007168/Bjarne-Stroustrup-What-is-Object-Oriented-Programming-Allfreebooks-tk],[http://www.pcmag.com/encyclopedia_term/0,2542,t=object-oriented+programming&i=48238,00.asp]. In this discussion we hold the perspective that polymorphism, encapsulation, and inheritance (as discussed in the above links) are the core elements of an O-O language or system.


In the following sections we will explore each language described above from the perspective of the salient characteristics necessary for a language to be classified as object-oriented. While some of these are more properly classified as systems rather than languages, evaluating them in context of the O-O languages concepts provides a relevant approach to understanding the benefits and limitations of each tool.
In the following sections we will explore each language described above from the perspective of the salient characteristics necessary for a language to be classified as object-oriented. While some of these are more properly classified as systems rather than languages, evaluating them in context of the O-O languages concepts provides a relevant approach to understanding the benefits and limitations of each tool.


=LabVIEW=
=LabVIEW=
With little doubt, the dominant force in graphical programming is National Instruments LabVIEW. Developed in 1986 as a tool to communicate with lab instruments, it grew into a full-fledged programming language with extensive capabilities. The examples used in the discussion below are all from a real application.
With little doubt, the dominant force in graphical programming is National Instruments [http://www.ni.com/labview/ LabVIEW]. Developed in 1986 as a tool to communicate with lab instruments, it grew into a full-fledged programming language with extensive capabilities. The examples used in the discussion below are all from a real application.


===Data Flow===
===Data Flow===
The dominant paradigm in LabVIEW programming is data flow. Unlike most languages where code execution is controlled by sequential commands or callbacks, in LabVIEW data flows along wires, and a code objects only execute when all its inputs receive data values – Figure 1.  
The dominant paradigm in LabVIEW programming is data flow. Unlike most languages where code execution is controlled by sequential commands or callbacks, in LabVIEW data flows along wires, and a code objects only execute when all its inputs receive data values – Figure 1.  


[[Image:graphicalFigure1.png|thumb|center|500px|Figure 1: Two blocks (functions) that initialize memory for image capture. Data flow is always from left to right. The right block only executes after it receives the outputs from the left block. In this case, all the inputs (blue and pink boxes) are constants.]]
[[Image:graphicalFigure1.png|thumb|center|500px|Figure 1: Two blocks (functions) that initialize memory for image capture. Data flow is typically from left to right. The right block only executes after it receives the outputs from the left block. In this case, all the inputs (blue and pink boxes) are constants.]]


===Strongly Typed===
===Strongly Typed===
In the above figure, different wires have different colors and texture patterns. LabVIEW is a strongly typed language: each color and texture pattern denotes a different data type. A terminal to a function only accepts wires of the correct type: this property virtual eliminating data-type errors while programming, because a wire is “broken” if it is not connected properly.
In the above figure, different wires have different colors and texture patterns. LabVIEW is a [http://en.wikipedia.org/wiki/Strong_typing strongly typed] language: each color and texture pattern denotes a different data type. A terminal to a function only accepts wires of the correct type: this property virtual eliminating data-type errors while programming, because a wire is “broken” if it is not connected properly.


[[Image:graphicalFigure2.png|thumb|center|800px|Figure 2: (Left) This window shows the inputs (left side of block) and outputs (right side of block) the “IMAQ ArrayToImage” function expects and generates respectively. Double, blue lines are 2D arrays of integers; purple, textured lines are image-type memory references; the yellow-and-brown line is a cluster (a linked-list); and the double, orange line is a 2D array of doubles. (Center) This block will not execute, as the wrong type is wired to an input (graphically indicated by the broken black line). (Right) The same block with the correct type input will execute (also note that some inputs are optional).]]
[[Image:graphicalFigure2.png|thumb|center|800px|Figure 2: (Left) This window shows the inputs (left side of block) and outputs (right side of block) the “IMAQ ArrayToImage” function expects and generates respectively. Double, blue lines are 2D arrays of integers; purple, textured lines are image-type memory references; the yellow-and-brown line is a cluster (a linked-list); and the double, orange line is a 2D array of doubles. (Center) This block will not execute, as the wrong type is wired to an input (graphically indicated by the broken black line). (Right) The same block with the correct type input will execute (also note that some inputs are optional).]]


===Control Structure===
===Control Structure===
All the major control structures exist in LabVIEW, some taking on multiple forms. A few of the more common ones are shown below.
All the major [http://en.wikipedia.org/wiki/Control_flow control structures] exist in LabVIEW, some taking on multiple forms. A few of the more common ones are shown below.


[[Image:graphicalFigure3.png|thumb|center|1000px|Figure 3: (Left) The large outside box is a while loop. All the contents of the box are executed each iteration. The box to the right is a for loop. The N in its upper left-hand corner is the number of times it is to run. In this case, the green wire is an array of Boolean values, and the “[]” symbol where the wire intersects the for-loop’s box indicates that the loop will run execute for each element of the Boolean array. The box inside the for loop is a case structure with two cases, true and false. The left image shows the contents of the true case, the right shows the false case. True versus false is selected via the element extracted from the Boolean array.]]
[[Image:graphicalFigure3.png|thumb|center|1000px|Figure 3: (Left) The large outside box is a while loop. All the contents of the box are executed each iteration. The box to the right is a for loop. The N in its upper left-hand corner is the number of times it is to run. In this case, the green wire is an array of Boolean values, and the “[]” symbol where the wire intersects the for-loop’s box indicates that the loop will run execute for each element of the Boolean array. The box inside the for loop is a case structure with two cases, true and false. The left image shows the contents of the true case, the right shows the false case. True versus false is selected via the element extracted from the Boolean array.]]
Line 34: Line 34:
In LabVIEW, a function is called a Virtual Instrument, or VI, harking back to the beginnings of the language as an instrument control tool. The advantage of the strongly-typed paradigm is that a function’s interface is automatically documented as soon as the programmer re-factors some functionality into a sub-VI. Each VI has a front panel, which is the function’s interface, and a back panel, which is the function’s implementation. Thus, with no coercion or behavioral training, programmers write code to interfaces rather than implementations.
In LabVIEW, a function is called a Virtual Instrument, or VI, harking back to the beginnings of the language as an instrument control tool. The advantage of the strongly-typed paradigm is that a function’s interface is automatically documented as soon as the programmer re-factors some functionality into a sub-VI. Each VI has a front panel, which is the function’s interface, and a back panel, which is the function’s implementation. Thus, with no coercion or behavioral training, programmers write code to interfaces rather than implementations.


[[Image:graphicalFigure4.png|thumb|center|1000px|Figure 4: (Left) The back panel of a VI (a function), (Center) The front panel for the same VI, (Right) the interface documentation automatically crated for the function.]]
[[Image:graphicalFigure4.png|thumb|center|1000px|Figure 4: (Left) The back panel of a VI (a function), (Center) The front panel for the same VI, (Right) the interface documentation automatically created for the function.]]


===Debugging===
===Debugging===
Line 44: Line 44:
Throughout LabVIEW, data is encapsulation by the declaration of the controls and indicators on each VI’s front panel. A control is data that enters a function. An indicator is data that leaves a function. A typedef defines a container of data via a standalone front panel: controls, indicators, and constants may then be instantiated referencing that typedef. A modification to the typedef propagates through the whole application.
Throughout LabVIEW, data is encapsulation by the declaration of the controls and indicators on each VI’s front panel. A control is data that enters a function. An indicator is data that leaves a function. A typedef defines a container of data via a standalone front panel: controls, indicators, and constants may then be instantiated referencing that typedef. A modification to the typedef propagates through the whole application.


[[Image:graphicalFigure6.png|thumb|center|1000px|Figure 6: (a) A complex typedef (this one is viewed as an indicator, the control appears similar). (b) The structure of the typedef is apparent either by viewing the nesting of the boxes in (a), or by viewing the tree structure in (b). In either case, the head item, “glove data”, is a cluster; items (1)-(4) are also clusters, each containing four Booleans; 1d, 2d, and vec are clusters, each containing two doubles. This complex data is passed to many parts of the application. ]]
[[Image:graphicalFigure6.png|thumb|center|1000px|Figure 6: (Left) A complex typedef (this one is viewed as an indicator, the control appears similar). (Right) The structure of the typedef is apparent either by viewing the nesting of the boxes in the left image, or by viewing the tree structure in right image. In either case, the head item, “glove data”, is a cluster; items "(1)"-"(4)" are also clusters, each containing four Booleans; "1d," "2d," and "vec" are clusters, each containing two doubles. This complex data is passed to many parts of the application. ]]


While there are a host of data structures in LabVIEW, the principle ones are highlighted below:
While there are a host of data structures in LabVIEW, the principle ones are highlighted below:
Line 56: Line 56:


===Polymorphic===
===Polymorphic===
The triangular equal sign in Figure 7 is possibly the best example of LabVIEW’s polymorphic capabilities. The pinkish wires going into the equal sign are of the type shown in Figure 6. The equal block deals with it perfectly
The triangular equal sign in Figure 7 is possibly the best example of LabVIEW’s polymorphic capabilities. The pinkish wires going into the equal sign are of the type shown in Figure 6. The equal block deals with the wires perfectly, despite that five different data types are encapsulated in the pinkish wire!


[[Image:graphicalFigure7.png|thumb|center|1000px|Figure 7: An excerpt from Figure 3. The default equal function does the appropriate operations on all the elements of the pinkish wire. The pinkish wire’s type is that shown in Figure 6!]]
[[Image:graphicalFigure7.png|thumb|center|1000px|Figure 7: An excerpt from Figure 3. The default equal function does the appropriate operations on all the elements of the pinkish wire. The pinkish wire’s type is that shown in Figure 6!]]


===Multi-Threading===
===Multi-Threading===
Unlike traditional languages where threading is a difficult concept, in LabVIEW it is trivial. The example below shows a portion of the large application from which all the examples were drawn. There are no less than 10 threads shown. Multiple other’s exist in the application. Various mechanisms for inter-thread communication are used in the application, including polling, broadcasting, global variables, and queuing. Communication method is careful chosen based on program requirements.
Unlike traditional languages where threading is a difficult concept, in LabVIEW it is trivial. The example below shows a portion of the large application from which all the examples were drawn. There are no less than 10 threads shown. Multiple other’s exist in the application. Various mechanisms for inter-thread communication are used in the application, including [http://en.wikipedia.org/wiki/Polling_%28computer_science%29 polling], broadcasting, [http://en.wikipedia.org/wiki/Global_variable global variables], and queuing. Communication method is careful chosen based on program requirements.


[[Image:graphicalFigure8.png|thumb|center|1000px|Figure 8: Many threads. Each block not contained in or wired to a control structure is an independent thread. Unlike most programming languages, it is trivial to identify and debug threads.]]
[[Image:graphicalFigure8.png|thumb|center|1000px|Figure 8: Many threads. Each block not contained in or wired to a control structure is an independent thread. Unlike most programming languages, it is trivial to identify and debug threads.]]


===Inheritance===
===Inheritance===
To this point we have not talked about inheritance. In general LabVIEW programming, inheritance is not necessary (the authors have never found reason to use it in years of programming), however it is robustly supported. Reference [5] is a fine overview of LabVIEW’s inheritance implementation, while [6] provides an excellent discussion of how LabVIEW’s designers chose their particular approach to inheritance, pass-by-value versus pass-by reference, and a host of other detailed computer-science questions.  
To this point we have not talked about inheritance. In general LabVIEW programming, inheritance is not necessary (the authors have never found reason to use it in years of programming), however it is robustly supported. Reference [http://zone.ni.com/reference/en-XX/help/371361B-01/lvconcepts/creating_classes/] is a fine overview of LabVIEW’s inheritance implementation, while [http://zone.ni.com/devzone/cda/tut/p/id/3574] provides an excellent discussion of how LabVIEW’s designers chose their particular approach to inheritance, pass-by-value versus pass-by reference, and a host of other detailed computer-science questions.


===Compiled===
===Compiled===
Line 72: Line 72:


===Weaknesses===
===Weaknesses===
In practice, the primary weakness of LabVIEW’s graphical programming paradigm is by-reference programming. LabVIEW is designed as a value-passing language [6], and thus program clarity suffers when by-reference programming is necessary. An example is shown below. Note that the language still offers by-reference functionality, it is simply harder for the programmer to understand what is happening.
In practice, the primary weakness of LabVIEW’s graphical programming paradigm is by-reference programming. LabVIEW is designed as a value-passing language [5], and thus program clarity suffers when by-reference programming is necessary. An example is shown below. Note that the language still offers by-reference functionality, it is simply harder for the programmer to understand what is happening.


[[Image:graphicalFigure9.png|thumb|center|1000px|
[[Image:graphicalFigure9.png|thumb|center|1000px|
Line 79: Line 79:
===Other Features===
===Other Features===
The LabVIEW tool suite is exceptional in a number of other ways.
The LabVIEW tool suite is exceptional in a number of other ways.
* It is easy to call dynamic libraries from with the language.
* It is easy to [http://zone.ni.com/devzone/cda/tut/p/id/3009 call dynamic libraries] from with the language.
* The same LabVIEW code (with certain exceptions) can be target to Windows, Mac, and Linux operating systems. What is more impressive is that the same code can be targeted at a hard real-time operating system, or turned into VHDL and sent to an FPGA.
* The same LabVIEW code (with certain exceptions) can be target to Windows, Mac, and Linux operating systems. What is more impressive is that the same code can be targeted at a hard real-time operating system, or turned into [http://en.wikipedia.org/wiki/VHDL VHDL] and sent to an [http://en.wikipedia.org/wiki/Field-programmable_gate_array FPGA].
* By dropping in a special block, LabVIEW can directly execute MATLAB- and C-syntax code, or (using another block) directly call the MATLAB API.
* By dropping in a special block, LabVIEW can directly execute [http://www.ni.com/labview/mathscript.htm MATLAB-] and [http://zone.ni.com/reference/en-XX/help/371361G-01/glang/formula_node/ C-]syntax code, or (using another block) directly call the MATLAB API.
* Because the code is graphical and flows from left to right, large programs tend to flow off the screen. The programmers tendency is to keep the code in one screen however. This tendency promotes excellent refactoring practice, as programmers tend to collect sprawling pieces of code and put them into sub-Vis, thus keeping the high-level application clean.
* Because the code is graphical and flows (generally) from left to right, large programs tend to flow off the screen. The programmer's tendency is to keep the code in one screen however. This tendency promotes excellent refactoring practice, as programmers tend to collect sprawling pieces of code and put them into sub-Vis, thus keeping the high-level application clean.
 
<include an embedded link for all the above>


=SIMULINK=
=SIMULINK=
Line 170: Line 168:


=References=
=References=
[1] O-O Wiki: http://en.wikipedia.org/wiki/Object-oriented_programming
[1] Object-oriented programming. Retrieved December 10, 2010, from Wikipedia. http://en.wikipedia.org/wiki/Object-oriented_programming


[2] What is “Object-oriented programming”?, Bjarne Stroustrup, 1991 http://www.scribd.com/doc/21007168/Bjarne-Stroustrup-What-is-Object-Oriented-Programming-Allfreebooks-tk
[2] Stroustrup, B. What is “Object-oriented programming”?. 1991. Retrieved December 10, 2010. http://www.scribd.com/doc/21007168/Bjarne-Stroustrup-What-is-Object-Oriented-Programming-Allfreebooks-tk


[3] PC Magazine O-O definition: http://www.pcmag.com/encyclopedia_term/0,2542,t=object-oriented+programming&i=48238,00.asp
[3] PC Magazine O-O definition. Retrieved December 10, 2010. http://www.pcmag.com/encyclopedia_term/0,2542,t=object-oriented+programming&i=48238,00.asp


[4] The benefits of programming graphically in NI LabVIEW: http://www.ni.com/labview/whatis/graphical-programming/
[4] Inheritance in LabVIEW. National Instruments. Retrieved December 10, 2010.: http://zone.ni.com/reference/en-XX/help/371361B-01/lvconcepts/creating_classes/


[5] Inheritance in LabVIEW: http://zone.ni.com/reference/en-XX/help/371361B-01/lvconcepts/creating_classes/
[5] The decisions behind LabVIEW’s O-O design. National Instruments. Retrieved December 10, 2010. http://zone.ni.com/devzone/cda/tut/p/id/3574


[6] The decisions behind LabVIEW’s O-O design: http://zone.ni.com/devzone/cda/tut/p/id/3574
[6] The benefits of programming graphically in NI LabVIEW. National Instruments. Retrieved December 10, 2010. http://www.ni.com/labview/whatis/graphical-programming/


[7] Simulink: http://www.mathworks.com/help/toolbox/simulink/simulink_product_page.html
[7] Simulink. The Math Works. Retrieved December 10, 2010. http://www.mathworks.com/help/toolbox/simulink/simulink_product_page.html


[8] San Script : http://www.sanscript.net/
[8] Sanscript. Northwoods Software. Retrieved December 10, 2010. http://www.sanscript.net/


[9] http://progopedia.com/language/sanscript/
[9] Sanscript. Retrieved December 10, 2010. http://progopedia.com/language/sanscript/

Latest revision as of 01:38, 12 December 2010

Graphical Programming: Why?

The history of computer programming languages is a continuous trend towards ever more powerful abstractions. Languages tend to push complexity into the background, letting the programmer focus primarily on the logic of the application.

While computer science abstractions are extremely useful, applying them in an engineering context can be particularly difficult for the uninitiated. As a way of managing program complexity, a number of companies have developed languages where graphics, rather than words, convey the programmer’s intents to the computer. The power of images as abstractions is obvious in our age of increasing multi-media, and while there are very old (relatively speaking) graphical programming languages, the field is still relatively sparse.

Why this scarcity of graphical languages? We can not say. In our view the chief advantage of a graphical language is program control “lives” in the spatial structure of the code, rather than in the grammar. For grammar-oriented individuals, and those used to programming languages, this may seem a disadvantage, however, for those more visually oriented, the two-dimensional space proffers a richer palette for creating. The following discussion illustrates how various abstractions are implemented in a few graphical languages. The elegant implementations of threading, of programming to interfaces, of refactoring for simplicity, and maintenance of type-correctness are powerful reasons for engineers and computer scientist alike to utilize graphical means for instructing computers.

Languages

In graphical languages there is one Everest, in comparison to which all other contenders are insignificant. Namely National Instruments' LabVIEW. Owing to this immense asymmetry in the industry, almost all the discussion that follows examines LabVIEW's salient characteristics, and a few words are spent on two other graphical programming environment, MathWorks Simulink, and Northwoods Software's Sanscript.

Throughout the web there are numerous definitions of object orientation [1],[2],[3]. In this discussion we hold the perspective that polymorphism, encapsulation, and inheritance (as discussed in the above links) are the core elements of an O-O language or system.

In the following sections we will explore each language described above from the perspective of the salient characteristics necessary for a language to be classified as object-oriented. While some of these are more properly classified as systems rather than languages, evaluating them in context of the O-O languages concepts provides a relevant approach to understanding the benefits and limitations of each tool.

LabVIEW

With little doubt, the dominant force in graphical programming is National Instruments LabVIEW. Developed in 1986 as a tool to communicate with lab instruments, it grew into a full-fledged programming language with extensive capabilities. The examples used in the discussion below are all from a real application.

Data Flow

The dominant paradigm in LabVIEW programming is data flow. Unlike most languages where code execution is controlled by sequential commands or callbacks, in LabVIEW data flows along wires, and a code objects only execute when all its inputs receive data values – Figure 1.

Figure 1: Two blocks (functions) that initialize memory for image capture. Data flow is typically from left to right. The right block only executes after it receives the outputs from the left block. In this case, all the inputs (blue and pink boxes) are constants.

Strongly Typed

In the above figure, different wires have different colors and texture patterns. LabVIEW is a strongly typed language: each color and texture pattern denotes a different data type. A terminal to a function only accepts wires of the correct type: this property virtual eliminating data-type errors while programming, because a wire is “broken” if it is not connected properly.

Figure 2: (Left) This window shows the inputs (left side of block) and outputs (right side of block) the “IMAQ ArrayToImage” function expects and generates respectively. Double, blue lines are 2D arrays of integers; purple, textured lines are image-type memory references; the yellow-and-brown line is a cluster (a linked-list); and the double, orange line is a 2D array of doubles. (Center) This block will not execute, as the wrong type is wired to an input (graphically indicated by the broken black line). (Right) The same block with the correct type input will execute (also note that some inputs are optional).

Control Structure

All the major control structures exist in LabVIEW, some taking on multiple forms. A few of the more common ones are shown below.

Figure 3: (Left) The large outside box is a while loop. All the contents of the box are executed each iteration. The box to the right is a for loop. The N in its upper left-hand corner is the number of times it is to run. In this case, the green wire is an array of Boolean values, and the “[]” symbol where the wire intersects the for-loop’s box indicates that the loop will run execute for each element of the Boolean array. The box inside the for loop is a case structure with two cases, true and false. The left image shows the contents of the true case, the right shows the false case. True versus false is selected via the element extracted from the Boolean array.

Programming to Interfaces

In LabVIEW, a function is called a Virtual Instrument, or VI, harking back to the beginnings of the language as an instrument control tool. The advantage of the strongly-typed paradigm is that a function’s interface is automatically documented as soon as the programmer re-factors some functionality into a sub-VI. Each VI has a front panel, which is the function’s interface, and a back panel, which is the function’s implementation. Thus, with no coercion or behavioral training, programmers write code to interfaces rather than implementations.

Figure 4: (Left) The back panel of a VI (a function), (Center) The front panel for the same VI, (Right) the interface documentation automatically created for the function.

Debugging

The data flow paradigm automatically structures the code as it is written, regardless of the physical orientation. If you turn on the “highlight execution” option, debugging is trivial, as you can physically see the data flowing. Additionally, if you open a sub-VI, the data going into that sub-VI is shown on the front panel: after the program stops that data is still there, and you can re-run the VI with those values – an especially useful tool in complex applications where a function’s initial conditions are hard to derive.

Figure 5: Same function as Figure 4, but in debug mode. Note the small pop-up blocks showing the values in various wires, and the red dots indicating which inputs to the blocks already have their values. When executing, small indicators follow the path of the wires, graphically showing the data “flow.”

Encapsulation

Throughout LabVIEW, data is encapsulation by the declaration of the controls and indicators on each VI’s front panel. A control is data that enters a function. An indicator is data that leaves a function. A typedef defines a container of data via a standalone front panel: controls, indicators, and constants may then be instantiated referencing that typedef. A modification to the typedef propagates through the whole application.

Figure 6: (Left) A complex typedef (this one is viewed as an indicator, the control appears similar). (Right) The structure of the typedef is apparent either by viewing the nesting of the boxes in the left image, or by viewing the tree structure in right image. In either case, the head item, “glove data”, is a cluster; items "(1)"-"(4)" are also clusters, each containing four Booleans; "1d," "2d," and "vec" are clusters, each containing two doubles. This complex data is passed to many parts of the application.

While there are a host of data structures in LabVIEW, the principle ones are highlighted below:

  • Numeric: a number, can be integer, double, single, byte, etc.,
  • String: the same as in other languages,
  • Array: can hold a collection homogenous of objects (including clusters),
  • Cluster: a form of a linked list that can hold a heterogeneous collection of other types, including other clusters.

Examples of these data types are shown in Figures 6 and 2 above. Note that in the hierarchy of the data structures, the different data types are identified by their coloration and textures.

Polymorphic

The triangular equal sign in Figure 7 is possibly the best example of LabVIEW’s polymorphic capabilities. The pinkish wires going into the equal sign are of the type shown in Figure 6. The equal block deals with the wires perfectly, despite that five different data types are encapsulated in the pinkish wire!

Figure 7: An excerpt from Figure 3. The default equal function does the appropriate operations on all the elements of the pinkish wire. The pinkish wire’s type is that shown in Figure 6!

Multi-Threading

Unlike traditional languages where threading is a difficult concept, in LabVIEW it is trivial. The example below shows a portion of the large application from which all the examples were drawn. There are no less than 10 threads shown. Multiple other’s exist in the application. Various mechanisms for inter-thread communication are used in the application, including polling, broadcasting, global variables, and queuing. Communication method is careful chosen based on program requirements.

Figure 8: Many threads. Each block not contained in or wired to a control structure is an independent thread. Unlike most programming languages, it is trivial to identify and debug threads.

Inheritance

To this point we have not talked about inheritance. In general LabVIEW programming, inheritance is not necessary (the authors have never found reason to use it in years of programming), however it is robustly supported. Reference [4] is a fine overview of LabVIEW’s inheritance implementation, while [5] provides an excellent discussion of how LabVIEW’s designers chose their particular approach to inheritance, pass-by-value versus pass-by reference, and a host of other detailed computer-science questions.

Compiled

Unlike many other languages, LabVIEW applications are actually compiled before they are run. When first introduced to the language, one usually suspects it is a scripting language however, as the compilation takes a mere fraction of a second.

Weaknesses

In practice, the primary weakness of LabVIEW’s graphical programming paradigm is by-reference programming. LabVIEW is designed as a value-passing language [5], and thus program clarity suffers when by-reference programming is necessary. An example is shown below. Note that the language still offers by-reference functionality, it is simply harder for the programmer to understand what is happening.

Figure 9: In the code above, the green and brown boxes are reference to front-panel controls. This is a polling loop that reads the values of the controls. Where it a loop that wrote to these same reference, and it was not the only piece of code that did so, steps to arbitrate writes would be required.

Other Features

The LabVIEW tool suite is exceptional in a number of other ways.

  • It is easy to call dynamic libraries from with the language.
  • The same LabVIEW code (with certain exceptions) can be target to Windows, Mac, and Linux operating systems. What is more impressive is that the same code can be targeted at a hard real-time operating system, or turned into VHDL and sent to an FPGA.
  • By dropping in a special block, LabVIEW can directly execute MATLAB- and C-syntax code, or (using another block) directly call the MATLAB API.
  • Because the code is graphical and flows (generally) from left to right, large programs tend to flow off the screen. The programmer's tendency is to keep the code in one screen however. This tendency promotes excellent refactoring practice, as programmers tend to collect sprawling pieces of code and put them into sub-Vis, thus keeping the high-level application clean.

SIMULINK

MathWorks has developed a design environment “Simulink” for simulation, modeling and analyzing Dynamic Systems. Simulink is a graphical block diagramming tool significantly used in DSP and control theory applications. For modeling, Simulink provides a graphical user interface (GUI) for building models as block diagrams, using click-and-drag mouse operations. With this interface, you can draw the models just as you would with pencil and paper (or as most textbooks depict them).

Simulink includes a comprehensive block library of sinks, sources, linear and nonlinear components, and connectors. User defined and custumized blocks can also be created in Simulink.

Features of Simulink

  • Component based Modeling.
  • User Interface Enhancements.
  • Embedded MATLAB.
  • Block enhancements.

Object-Oriented Features

Simulink has is similar to an object oriented language. It has a class library with objects defined. It largely implements data type inheritance and even block level inheritance.

However, polymorphism isn't implement in Simulink. But, Simulink.Signal and Simulink.Parameter Objects do obey model Data Type Override Settings.

Although MATLAB SIMULINK is a CASE tool, which is not object-oriented, a function oriented design could be developed, which offers nearly all the possibilities of a classical object-oriented approach.

Example of Simple program in Simulink

Amplification of a sine wave

Sanscript

San Script is a Graphical Programming Language based on Dataflow Programming. It was developed by Northwoods Software in 1995. Sanscript IDE is broadly divided in three major groups: Overview, Catalog and Canvas. Overview window(on left) displays the list of folders available in Sanscript. These folders are grouped into General (standard function libraries), Examples and Templates (groups of ready-to-run sample programs and sample functions provided in the distribution) and USER (User defined programs). Catalog window (on the bottom) displays the contents of chosen folder: programs and functions. Functions can be dragged into Canvas for further usage, and programs can be clicked for editing. Note that a function can be not only library one but also a user-defined one. Canvas window is the main background which displays the flowgram to be edited.

Features of Sanscript

1. Visual Language

  • Has visual Functions with inputs and outputs
  • Constant variables
  • Links to pass data between functions.
  • Repeats / loops.
  • Comments (to capture programmers intent)
  • Links to remote Connectors (allows deeply nested functions).
  • Code regeneration like in Java/C/C++.


2. Rapid Component Creation and Reuse

  • Visual Debugging
  • Expand function / Replace a constant.


3. Visual Components and Run Time Functionality

  • Callout to DLL shared libraries
  • Runtime exception handling


4. Editor

  • Automatic flow diagram layout
  • Zoom in or out : to scale large programs
  • Hide-able labels or auto-show them.


Sanscript follows the following paradigm: Imperative, Non- Strict, Scalar, Value-Level, Structured and Visual. It follows a dynamic typing discipline.

Polymorphic

As this language is dynamically typed, we can say that it do show some features of being polymorphism. But it is not so clearly understandable.

Inheritance

Inheritance is implicitly observed as many functions are taken from a group of directories. So they do possess Single inheritance.

Encapsulation

Sanscript being written in C++ / Microsoft Foundation Classes, do demonstrate data hiding behavior. Thus the interdependencies between software components is restricted.

Examples of Programs

Example 1: Displaying an Message.


Example 2: Repeats/Loops.

The repeat will execute the loop 3 times, as the item is counted from 1..2..3. The value of total is incremented from 0 to 1 to 3 then finally to 6. The output of the execution will be 6.

References

[1] Object-oriented programming. Retrieved December 10, 2010, from Wikipedia. http://en.wikipedia.org/wiki/Object-oriented_programming

[2] Stroustrup, B. What is “Object-oriented programming”?. 1991. Retrieved December 10, 2010. http://www.scribd.com/doc/21007168/Bjarne-Stroustrup-What-is-Object-Oriented-Programming-Allfreebooks-tk

[3] PC Magazine O-O definition. Retrieved December 10, 2010. http://www.pcmag.com/encyclopedia_term/0,2542,t=object-oriented+programming&i=48238,00.asp

[4] Inheritance in LabVIEW. National Instruments. Retrieved December 10, 2010.: http://zone.ni.com/reference/en-XX/help/371361B-01/lvconcepts/creating_classes/

[5] The decisions behind LabVIEW’s O-O design. National Instruments. Retrieved December 10, 2010. http://zone.ni.com/devzone/cda/tut/p/id/3574

[6] The benefits of programming graphically in NI LabVIEW. National Instruments. Retrieved December 10, 2010. http://www.ni.com/labview/whatis/graphical-programming/

[7] Simulink. The Math Works. Retrieved December 10, 2010. http://www.mathworks.com/help/toolbox/simulink/simulink_product_page.html

[8] Sanscript. Northwoods Software. Retrieved December 10, 2010. http://www.sanscript.net/

[9] Sanscript. Retrieved December 10, 2010. http://progopedia.com/language/sanscript/