CSC/ECE 506 Spring 2012/12b ad

On-chip Interconnects

Introduction

The full content of this article will be posted later today; please check again later.

As the number of processors in multiple-processor systems increases, increasing consideration needs to be given to how those processors communicate. With current technology, for a small number of processors shared-memory arrangements are quite effective. However, as the number of processors increases contention for available resources (memory, bus time, etc) increases, negatively impacting performance of the system. However, keeping these processors all on the same physical piece of hardware is convenient and helps performance due to physical proximity. As such, it is desirable to design hardware where many cores are part of the same die while allowing for the performance gains possible with interconnections. Recently there has been more research into these on-chip interconnects, and this article will explore the state of those efforts.

Topologies

The intracacies of semiconductor design and layout afford many different kinds of possible layouts when creating networking topologies on SoCs. Specifically, designs need to be amenable to creation on a two-dimension substrate, and as such practically limits the use of some more advanced topologies like hypercubes <ref name="GrotKeckler">Grot and Keckler</ref>.

Design Considerations

Energy Consumption

Multi-processor SoCs require additional energy in order to operate the on-chip interconnection hardware like routers. Too, the links between components can introduce increased losses in regards to required voltages and physical arrangement. Indeed, "on-chip network power has been estimated to consume up to 28% of total chip power" due to "channels, router fifos and router crossbar fabrics"<ref name="GrotKeckler" />. Simple topologies use less power due to simpler routers, but the increased number of hops can lead to overal increased power consumption.

References

<references></references>