CSC/ECE 517 Fall 2007/wiki1 3 b6: Difference between revisions

From Expertiza_Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
Example use of Currying in Ruby by Ben Parees
Example use of Currying in Ruby by Ben Parees
Currying refers to a programming technique in which the number of parameters to a function are reduced by creating a new function based on the original, but fixing some of the original arguments.  That is, if we have a function ''f(x,y,z)'', we can define a new function ''g(x)'' which is defined as ''f(x,1,2)''.
Now ''f(x,1,2)==g(x)'', allowing us to invoke the simpler g(x) rather than ''f(x,1,2)''.  To curry a function means to create the simplified function with fixed arguments, from a function with more arguments.
Currying has several benefits.
<ol>
<li>It simplifies writing code by reducing the number of arguments that must be typed each time</li>
<li>It reduces the risk of error because there are fewer arguments for which values could be incorrect</li>
<li>It can enhance code readability by defining multiple functions with descriptive names rather than a single function with obscure arguments</li>
</ol>
Ruby provides for function currying using the lambda operator.  The lambda operator allows the programmer to define a new function.  To curry'' g(x)'' from ''f(x,1,2)'' in Ruby would be written as: ''g=lambda {|x| f(x,1,2)}''
This would assign variable g to be a new function which invokes f() with the final two arguments fixed as 1 and 2 respectively.


The following pair of programs demonstrates the value of currying functions in Ruby.  The program itself implements a simple account balance management tool which allows for withdrawals and deposits as specified by the user.  In the first program, a Logger class is defined with a single function, "logMessage" which takes an integer log level parameter, and the message to be logged.  Depending on the log level specified, and the overall logging level set in the Logger class, the message may or may not be displayed to the user.  If the message is to be displayed, it will be prefixed with a string indicating the message's relative importance.
The following pair of programs demonstrates the value of currying functions in Ruby.  The program itself implements a simple account balance management tool which allows for withdrawals and deposits as specified by the user.  In the first program, a Logger class is defined with a single function, "logMessage" which takes an integer log level parameter, and the message to be logged.  Depending on the log level specified, and the overall logging level set in the Logger class, the message may or may not be displayed to the user.  If the message is to be displayed, it will be prefixed with a string indicating the message's relative importance.


The purpose of this class is to allow programmers to easily reconfigure their program to provide varying degrees of debugging output without changing code.  They can simply change the log level that is configured, and automatically filter out messages which are below that log level.  In addition, messages are automatically tagged with a string indicating their severity, which makes analyzing logs much easier.
The purpose of this Logger class is to allow programmers to easily reconfigure their program to provide varying degrees of debugging output without changing code.  They can simply change the log level that is configured, and automatically filter out messages which are below that log level.  In addition, messages are automatically tagged with a string indicating their severity, which makes analyzing logs much easier.  Unfortunately, the logMessage method is fairly cumbersome due to the requirement that the programmer specify the log level at each invocation.


Here is the initial version of the program:
Here is the initial version of the program:
Line 103: Line 117:
Now the same program, but with 4 new methods defined by currying the original logMessage method.  The new methods are:
Now the same program, but with 4 new methods defined by currying the original logMessage method.  The new methods are:
<ol>
<ol>
<li> debug - print a debug level message</li>
<li> debug - print a debug level message by currying with logMessage(0,msg) </li>
<li> print - print an informational message</li>
<li> print - print an informational message by currying with logMessage(1,msg) </li>
<li> warn - print a warning level message</li>
<li> warn - print a warning level message by currying with logMessage(2,msg)</li>
<li> error - print an error level message</li>
<li> error - print an error level message by currying with logMessage(3,msg)</li>
</ol>
</ol>
The actual currying is done in the Logger class, and the invocation of these methods can be seen in the body of the main program and the Account class.
The actual currying is done in the Logger class, and the invocation of these methods can be seen in the body of the main program and the Account class.
Line 221: Line 235:
</pre>
</pre>


Notice how much easier it is to follow the flow of the program now through the clear labelling of debug/print/warning/error statements.  In addition, observe how simple it would be to add a new trace statement at any log level simply by invoking the desired method rather than having to look up the appropriate log level value.
Notice how much easier it is to follow the flow of the program now through the clear labeling of debug/print/warning/error statements.  In addition, observe how simple it would be to add a new trace statement at any log level simply by invoking the desired method rather than having to look up the appropriate log level value.




--[[User:Bmparees|Bmparees]] 00:48, 12 September 2007 (EDT)
--[[User:Bmparees|Bmparees]] 00:48, 12 September 2007 (EDT)

Revision as of 00:29, 14 September 2007

Example use of Currying in Ruby by Ben Parees

Currying refers to a programming technique in which the number of parameters to a function are reduced by creating a new function based on the original, but fixing some of the original arguments. That is, if we have a function f(x,y,z), we can define a new function g(x) which is defined as f(x,1,2).

Now f(x,1,2)==g(x), allowing us to invoke the simpler g(x) rather than f(x,1,2). To curry a function means to create the simplified function with fixed arguments, from a function with more arguments.

Currying has several benefits.

  1. It simplifies writing code by reducing the number of arguments that must be typed each time
  2. It reduces the risk of error because there are fewer arguments for which values could be incorrect
  3. It can enhance code readability by defining multiple functions with descriptive names rather than a single function with obscure arguments

Ruby provides for function currying using the lambda operator. The lambda operator allows the programmer to define a new function. To curry g(x) from f(x,1,2) in Ruby would be written as: g=lambda {|x| f(x,1,2)} This would assign variable g to be a new function which invokes f() with the final two arguments fixed as 1 and 2 respectively.

The following pair of programs demonstrates the value of currying functions in Ruby. The program itself implements a simple account balance management tool which allows for withdrawals and deposits as specified by the user. In the first program, a Logger class is defined with a single function, "logMessage" which takes an integer log level parameter, and the message to be logged. Depending on the log level specified, and the overall logging level set in the Logger class, the message may or may not be displayed to the user. If the message is to be displayed, it will be prefixed with a string indicating the message's relative importance.

The purpose of this Logger class is to allow programmers to easily reconfigure their program to provide varying degrees of debugging output without changing code. They can simply change the log level that is configured, and automatically filter out messages which are below that log level. In addition, messages are automatically tagged with a string indicating their severity, which makes analyzing logs much easier. Unfortunately, the logMessage method is fairly cumbersome due to the requirement that the programmer specify the log level at each invocation.

Here is the initial version of the program:

class Logger
        @logLevel
        attr_accessor :logLevel
        def initialize(n)
                @logLevel=n
        end

        def logMessage(n,msg)
                if(n>=@logLevel)
                        prepend=case n
                                when 0 then 'DEBUG: '
                                when 1 then ''
                                when 2 then 'WARNING: '
                                when 3 then 'ERROR: '                                
                        end
                        puts prepend+msg
                end

        end
end
class Account
        @balance
        @logger
        attr_reader :balance
        def initialize(n,logger)
                @balance=n
                @logger=logger
                logger.logMessage(0,"initialized account with balance of #{n}");
        end


        def getAmount
          @logger.logMessage(0,"enter getAmount method")
          amount=gets.chomp!.to_f
          @logger.logMessage(0,"Got amount #{amount}")
          if(amount<0)
                @logger.logMessage(3,"Amount is less than zero, amount will be set to zero")
                amount=0
          end
          return amount
        end

        def withdraw
          @logger.logMessage(0,"enter withdraw method")
          @logger.logMessage(1,"How much would you like to withdraw?")
          amount=getAmount
          @logger.logMessage(0,"withdrawing amount of #{amount}")
          @balance=@balance-amount
          if(@balance<0)
                @logger.logMessage(2,"Account is overdrawn")
          end
          @logger.logMessage(0,"new balance is #{@balance}")
        end

        def deposit
          @logger.logMessage(0,"enter depost method")
          amount=getAmount
          @logger.logMessage(0,"depositing amount of #{amount}")
          @balance=@balance+amount
          @logger.logMessage(0,"new balance is #{balance}")
        end

end
action="d"
logger=Logger.new(0)
account=Account.new(100,logger)


while action!="q"

        logger.logMessage(1,"Balance=#{account.balance}, would you like to withdraw, deposit, or quit [w/d/q]?")

        action=gets.chomp!
        logger.logMessage(0,"user chose action #{action}")
        if action=="w"
          account.withdraw
        elsif action=="d"
          account.deposit
        elsif action=="q"
          logger.logMessage(1,"goodbye")
        end
end


In the initial form of the program, the programmer must specify the log level parameter for each trace statement they wish to create. This approach has two drawbacks:

  1. The programmer must know what log level corresponds to what level of trace (0=debug, 1=info, 2=warning, 3=error, etc). If they make a mistake in their numbering, the trace will not be correct.
  2. The code is hard to read since it is not obvious just by looking at a piece of code, whether a message is going to be printed as a debug statement, informational statement, warning, etc.

Now the same program, but with 4 new methods defined by currying the original logMessage method. The new methods are:

  1. debug - print a debug level message by currying with logMessage(0,msg)
  2. print - print an informational message by currying with logMessage(1,msg)
  3. warn - print a warning level message by currying with logMessage(2,msg)
  4. error - print an error level message by currying with logMessage(3,msg)

The actual currying is done in the Logger class, and the invocation of these methods can be seen in the body of the main program and the Account class.

class Logger
        @logLevel
        @debug
        @print
        @warn
        @error
        attr_accessor :logLevel
        def initialize(n)
                @logLevel=n
                @debug=lambda{|msg| logMessage(0,msg)}
                @print=lambda{|msg| logMessage(1,msg)}
                @warn= lambda{|msg| logMessage(2,msg)}
                @error=lambda{|msg| logMessage(3,msg)}
        end

        def logMessage(n,msg)
                if(n>=@logLevel)
                        prepend=case n
                                when 0 then 'DEBUG: '
                                when 1 then ''
                                when 2 then 'WARNING: '
                                when 3 then 'ERROR: '
                        end
                        puts prepend+msg
                end

        end

        def debug(msg)
                @debug.call(msg)
        end
        def print(msg)
                @print.call(msg)
        end
        def warn(msg)
                @warn.call(msg)
        end
        def error(msg)
                @error.call(msg)
        end


end

class Account
        @balance
        @logger
        attr_reader :balance
        def initialize(n,logger)
                @balance=n
                @logger=logger
                logger.debug("initialized account with balance of #{n}");
        end


        def getAmount
          @logger.debug("enter getAmount method")
          amount=gets.chomp!.to_f
          @logger.debug("Got amount #{amount}")
          if(amount<0)
                @logger.error("Amount is less than zero, amount will be set to zero")
                amount=0
          end
          return amount
        end

        def withdraw
          @logger.debug("enter withdraw method")
          @logger.print("How much would you like to withdraw?")
          amount=getAmount
          @logger.debug("withdrawing amount of #{amount}")
          @balance=@balance-amount
          if(@balance<0)
                @logger.warn("Account is overdrawn")
          end
          @logger.debug("new balance is #{@balance}")
        end

        def deposit
          @logger.debug("enter depost method")
          amount=getAmount
          @logger.debug("depositing amount of #{amount}")
          @balance=@balance+amount
          @logger.debug("new balance is #{balance}")
        end

end


action="d"
logger=Logger.new(0)
account=Account.new(100,logger)


while action!="q"

        logger.print("Balance=#{account.balance}, would you like to withdraw, deposit, or quit [w/d/q]?")

        action=gets.chomp!
        logger.debug("user chose action #{action}")
        if action=="w"
          account.withdraw
        elsif action=="d"
          account.deposit
        elsif action=="q"
          logger.print("goodbye")
        end
end

Notice how much easier it is to follow the flow of the program now through the clear labeling of debug/print/warning/error statements. In addition, observe how simple it would be to add a new trace statement at any log level simply by invoking the desired method rather than having to look up the appropriate log level value.


--Bmparees 00:48, 12 September 2007 (EDT)