CSC/ECE 517 Fall 2011/ch2 2f jm: Difference between revisions

From Expertiza_Wiki
Jump to navigation Jump to search
 
(54 intermediate revisions by 3 users not shown)
Line 5: Line 5:
==Introduction==
==Introduction==


There are many changes involved when you migrate your Rails application from Rails 2 to Rails 3.  If your application is a based on Rails 2, there are important changes you'll need to make to run your application in Rails 3.<ref name="refone">Carletti, Simone.  "The Road to Rails 3: make your Rails 2.3 project more Rails 3 oriented" http://www.simonecarletti.com/blog/2010/07/the-way-to-rails-3/</ref>  There are additional changes planned for Rails 3.1 and Rails 3.2 that you should consider now if you're migrating from Rails 2 to Rails 3.<ref name="reftwo">Naik, Pratik.  "Active Record Query Interface 3.0" http://m.onkey.org/active-record-query-interface</ref>  A variety of these changes, including changes covered in class, are covered in the sections below.
There are many changes involved when you migrate your Rails application from Rails 2 to Rails 3.  If your application is a based on Rails 2, there are important changes you'll need to make to run your application in Rails 3.<ref name="refone">Carletti, Simone.  "The Road to Rails 3: make your Rails 2.3 project more Rails 3 oriented" http://www.simonecarletti.com/blog/2010/07/the-way-to-rails-3/</ref>.
Rails 3 is a result of the merge between Rails and Merb. Merb is famous for honoring agnosticism and Rails has a long history of providing rock-solid defaults. We’ll see how Rails 3 hits a sweet spot in being an opinionated and agnostic framework at the same time, resulting in a framework that’s sure to be appreciated by developers of both camps. <ref name="Upgrading a Rails 2 App to Rails 3">Ruby. http://www.railsdispatch.com/posts/upgrading-a-rails-2-app-to-rails-3/</ref>
There are additional changes planned for Rails 3.1 and Rails 3.2 that you should consider now if you're migrating from Rails 2 to Rails 3.<ref name="reftwo">Naik, Pratik.  "Active Record Query Interface 3.0" http://m.onkey.org/active-record-query-interface</ref>  A variety of these changes, including changes covered in class, are covered in the sections below.


== Differences between Rails 2 and Rails 3 ==
== Differences between Rails 2 and Rails 3 ==
Line 18: Line 20:
<li>Make sure you have unit, functional and integration testing already implemented in your application before porting it to Rails 3.<ref>"Ruby on Rails Guides: A Guide to Testing Rails Applications" http://guides.rubyonrails.org/testing.html></ref></li>
<li>Make sure you have unit, functional and integration testing already implemented in your application before porting it to Rails 3.<ref>"Ruby on Rails Guides: A Guide to Testing Rails Applications" http://guides.rubyonrails.org/testing.html></ref></li>
<li>Rails 3 incorporates string escaping.  This can break your view helpers, so they will need to be reviewed and tested.<ref name="refone"/></li>
<li>Rails 3 incorporates string escaping.  This can break your view helpers, so they will need to be reviewed and tested.<ref name="refone"/></li>
<li>Upgrade your Ruby software to at least version 1.8.7 or skip to 1.9.2.  Other versions do not work or do not work properly.<ref>"Ruby on Rails Guides: Ruby on Rails 3.0 Release Notes" http://edgeguides.rubyonrails.org/3_0_release_notes.html</ref></li>
<li>Upgrade your Ruby software to at least version 1.8.7 or skip to 1.9.2.  Other versions do not work or do not work properly.<ref name="refthree">"Ruby on Rails Guides: Ruby on Rails 3.0 Release Notes" http://edgeguides.rubyonrails.org/3_0_release_notes.html</ref></li>
</ul>
</ul>


Line 26: Line 28:


<ul>
<ul>
<li>The standard for managing Gem dependencies is called <b>Bundler</b><ref>"Bundler: The Best Way to Manage Ruby Applications" http://gembundler.com/</ref>.  This is backwards compatible with Rails 2.3 so you can implement this prior to migrating to Rails 3.<ref>"Using Bundler with Rails 2.3" http://gembundler.com/rails23.html</ref></li>
<li>The standard for managing Gem dependencies is called [http://gembundler.com/ Bundler]<ref>"Bundler: The Best Way to Manage Ruby Applications" http://gembundler.com/</ref>.  This is backwards compatible with Rails 2.3 so you can [http://gembundler.com/rails23.html implement this] prior to migrating to Rails 3.<ref>"Using Bundler with Rails 2.3" http://gembundler.com/rails23.html</ref></li>
<li>Rails 3 is JavaScript framework agnostic and is no longer prototype-oriented.<ref name="refone"/>  As a result, there are changes that require attention.<ref>Carletti, Simone (June 2010). "Unobtrusive JavaScript in Rails 3" http://www.simonecarletti.com/blog/2010/06/unobtrusive-javascript-in-rails-3/</ref></li>
<li>Rails 3 is JavaScript framework agnostic and is no longer prototype-oriented.<ref name="refone"/>  As a result, there are [http://www.simonecarletti.com/blog/2010/06/unobtrusive-javascript-in-rails-3/ changes] that require attention.<ref>Carletti, Simone (June 2010). "Unobtrusive JavaScript in Rails 3" http://www.simonecarletti.com/blog/2010/06/unobtrusive-javascript-in-rails-3/</ref></li>
<li><b>Object#returning</b> has been removed and you should begin using <b>Object#Tap</b>.<ref name="refone"/></li>
<li><b>Object#returning</b> has been removed and you should begin using <b>Object#Tap</b>.<ref name="refone"/></li>
<li>Make sure your YAML files with embedded HTML have a key that ends in <b>_html</b> or the HTML will be escaped.<ref name="refone"/></li>
<li>Make sure your YAML files with embedded HTML have a key that ends in <b>_html</b> or the HTML will be escaped.<ref name="refone"/></li>
<li>The Rails Metal feature has been removed.<ref name="refone"/></li>
<li>The Rails Metal feature has been removed.<ref name="refone"/></li>
<li>You can only have <b>ActiveRecord</b> fixtures in the test/fixtures folder.<ref name="refone"/></li>
<li>You can only have <b>ActiveRecord</b> fixtures in the test/fixtures folder.<ref name="refone"/></li>
<li>Rails helpers for <b>input</b>, <b>form</b>, <b>error_messages_for</b> and <b>error_message_on</b> have been removed.<ref name="refone"/>.  A plugin called [https://github.com/rails/dynamic_form dynamic_form] is available to continue using this functionality.<ref>"rails/dynamic_form - GitHub" https://github.com/rails/dynamic_form</ref>  However, there is another method by Ryan Bates to accomplish these features without using a plugin.<ref>Bates, Ryan. "Validations in Rails 3" http://railscasts.com/episodes/211-validations-in-rails-3</ref></li>
<li>Rails helpers for <b>input</b>, <b>form</b>, <b>error_messages_for</b> and <b>error_message_on</b> have been removed.<ref name="refone"/>.  A plugin called [https://github.com/rails/dynamic_form dynamic_form] is available to continue using this functionality.<ref>"rails/dynamic_form - GitHub" https://github.com/rails/dynamic_form</ref>  However, there is another method by [http://railscasts.com/episodes/211-validations-in-rails-3 Ryan Bates] to accomplish these features without using a plugin.<ref>Bates, Ryan. "Validations in Rails 3" http://railscasts.com/episodes/211-validations-in-rails-3</ref></li>
</ul>
</ul>


=== Optional Changes ===
=== Optional Changes ===


==Example Code differences between Rails 2 and Rails 3 (from class) ==
Several constants available in Rails 2 have been changed in Rails 3.  These constants are RAILS_ROOT, RAILS_ENV, and RAILS_DEFAULT_LOGGER.  The new constants are <b>Rails.root</b>, <b>Rails.env</b> and <b>Rails.logger</b>, respectively.<ref name="refone"/>.  Simone Carletti identifies other optional changes that you may need to make.


=== Deprecated Methods in Active Record Query Interface for Rails 3 ===
For purposes of this class, the next section identifies changes between Rails 2 and Rails 3 that were identified in class.
 
=== Other Changes? ===
 
Have all the changes been identified here?  Probably not.  There are a variety of references available on the Internet that address changes from Rails 2 to Rails 3.  Some are identified in the References section below, and some are identified here:
 
<ul>
<li>[http://weblog.rubyonrails.org/2010/8/29/rails-3-0-it-s-done Rails 3.0: It's Ready!]<ref>"Rails 3.0: It's Ready!" http://weblog.rubyonrails.org/2010/8/29/rails-3-0-it-s-done</ref></li>
<li>[http://railscasts.com/episodes/225-upgrading-to-rails-3-part-1 Upgrading to Rails 3 Part 1]<ref>"Upgrading to Rails 3 Part 1" http://railscasts.com/episodes/225-upgrading-to-rails-3-part-1</ref></li>
<li>[http://www.railsdispatch.com/posts/upgrading-a-rails-2-app-to-rails-3 Upgrading a Rails 2 App to Rails 3]<ref>Reza, Rizwan "Upgrading a Rails 2 App to Rails 3" http://www.railsdispatch.com/posts/upgrading-a-rails-2-app-to-rails-3</ref></li>
</ul>
 
You can use Google search to identify additional articles with change information.
 
== Example Code ==
 
=== Active Record Query Interface for Rails 3 ===


<p>
<p>


At this point you may have discovered some of the great functionalities that come with Rails 3. When you start to switch from Rails 2 to Rails 3, you may start to see warning messages or even errors in some of your existing methods. That is because in Rails 3, all of the internals, especially the ActiveRecord interface, received a massive clean out, which makes the Rails modularity framework much cleaner and more extensible for developers to use. As this result, some of the methods in Rails 2 are now deprecated or even fully removed, which causes warning messages or error when compiling the code. Below will show a list of these deprecated methods.
At this point you may have discovered some of the great functionalities that come with Rails 3. But when you start to switch from Rails 2 to Rails 3, you may find warning messages or even errors in some of your existing methods. That is because in Rails 3, all of the internals, especially the ActiveRecord interface, were updated extensively, which makes the Rails modularity framework much cleaner and more extensible for developers to use. <ref>"Is Rails 3.0 a Game Changer?" http://lindsaar.net/2010/2/4/is_rails_3_a_game_changer</ref>  Because of this, some of the methods in Rails 2 are now deprecated or even fully removed, which causes warning messages or errors when compiling the old code. Below is a list of these deprecated methods in the ActiveRecord interface.


==== find([:all | :first | :last]) Method ====
==== The find([:all | :first | :last]) Method ====


The find(*args) method in the Active Record interface allows user to retrieve objects from the database table. User can retrieve the first or the last object in the table, or an object by its id, or all the objects at once. These methods followed the syntax of #find(:all), #find(:first) or #find(:last)in Rails 2. However in Rails 3, they are now deprecated and have been converted to #all, #first, and #last alternatives. See the following example for comparison:
The find(*args) method in the Active Record interface allows user to retrieve objects from the database. The user has different ways to retrieve objects, for example, they can retrieve only the first or the last object of the table, or just one object by its primary id, or all of the objects at once. These methods follow the syntax of find(:all), find(:first) or find(:last)in Rails 2. However in Rails 3, they are now deprecated and have been converted to all, first, and last alternatives. See the following example for comparison:


<pre>
<pre>
Line 61: Line 79:
</pre>
</pre>


==== find(*args, options) Method ====
==== The find(*args, OPTIONS) Method ====


In Rails 3.1, ActiveRecord methods that have Options argument are also deprecated and will be removed in Rails 3.2. These passing options hash includes :conditions, :include, :joins, :limit, :offset, :order, :select, :readonly, :group, :having, :from, :lock. So what is the replacement for the find(*args, options)method? The answer is inside the new Rails 3 API. The new Rails 3 API has the following finder methods to replace with the find(*args, options)method.  
In Rails 3.1, ActiveRecord methods that have <b>OPTIONS</b> as an argument are also deprecated and will be removed in Rails 3.2. Passing option hashes include :conditions, :include, :joins, :limit, :offset, :order, :select, :readonly, :group, :having, :from, :lock. So what is the replacement for this find(*args, options) method? The answer is inside the new Rails 3 API. The new Rails 3 API has the following new finder methods to replace with the find(*args, options) method.<ref name="reftwo"/>


<ul>
<ul>
Line 80: Line 98:
</ul>
</ul>


For examples, in Rails 2 you do
For example, in Rails 2 you used to do
<pre>
<pre>
# deprecated statements
# the deprecated version
@desert_categories = Category.find(:all, :conditions => {:name => "Desert"})
@desert_categories = Category.find(:all, :conditions => {:name => "Desert"})
@two_categories = Category.find(:all, :limit => 2)
@two_categories = Category.find(:all, :limit => 2)
Line 90: Line 108:
But in Rails 3, you should now do
But in Rails 3, you should now do
<pre>
<pre>
# correct version
# the new version
@desert_categories = Category.where(:name=>"Desert")
@desert_categories = Category.where(:name=>"Desert")
@two_categories = Category.limit(2)
@two_categories = Category.limit(2)
Line 96: Line 114:
</pre>
</pre>


Furthermore, all of the above methods are defined on the Relation object, which gains the ability of chainability.  In other word, all the methods can be chained together. This is a very powerful feature because it allows you to define multiple conditions in a find statement using just one line of code, which makes developers’ life so much easier. For example, if you want to return the 10 newest Desert recipes in descendent order based on the creation date, you can do
Furthermore, all of the above finder methods are defined on the Relation object, which gains the ability of chainability.  In other words, all these methods can be chained together for use. This is a very powerful feature because it allows you to define multiple conditions in just one line of finder statement, which makes developers’ life so much easier. For example, if you want to return the 10 newest Desert recipes in descending order based on the creation date, you can do


<pre>
<pre>
Line 102: Line 120:
</pre>
</pre>


==== named_scope Method ====
==== The named_scope Method ====


The named_scoped method is deprecated and needed to be renamed to scope in Rails 3. For instance, a definition like :
The named_scoped method is also deprecated. But to fix it, all you need to do is to rename named_scope to scope. <ref name="refthree"/> For instance, a definition like :


<pre>
<pre>
class Category
class Category
name_scope :desert, :conditions => {:name => “Desert”}
    name_scope :desert, :conditions => {:name => “Desert”}
name_scope :fruit, :condition => {:name => “Fruit”}
    name_scope :fruit, :condition => {:name => “Fruit”}
end
end
</pre>
</pre>


Will become :
will become :


<pre>
<pre>
class Category
class Category
scope :desert, :conditions => {:name => “Desert”}
    scope :desert, :conditions => {:name => “Desert”}
scope :fruit, :condition => {:name => “Fruit”}
    scope :fruit, :condition => {:name => “Fruit”}
end  
end  
</pre>
</pre>


However, since using options hash is deprecated in Rails 3.1, therefore the new finder methods should be used in this case:
However, since using options hash is deprecated in Rails 3.1, therefore the new finder methods should be used as below:


<pre>
<pre>
class Category
class Category
scope :desert, where {:name => “Desert”}
    scope :desert, where {:name => “Desert”}
scope :fruit, where {:name => “Fruit”}
    scope :fruit, where {:name => “Fruit”}
end  
end  
</pre>
</pre>
Line 137: Line 155:
fruit = Category.fruit
fruit = Category.fruit
</pre>
</pre>
=== The New DSL in Rails 3 Router ===
The Rails router is used to recognize URLs and dispatch them to a controller’s action. It can also generate paths and URLs, avoiding the need to hardcode strings in the views. <ref name="refRails1"> "Rails Routing from the Outside In" http://edgeguides.rubyonrails.org/routing.html </ref> In Rails 3, other than handing basic routes in the old Domain Specific Langauges (DSL), the new DSL has some advanced features that every developer will appreciate.
Comparing with the old DSL in Rails 2, the new DSL takes less keystroke and is more readable. For example, here is how DSL used to look in Rails 2: <ref>"Revamped Routes in Rails 3" http://rizwanreza.com/2009/12/20/revamped-routes-in-rails-3</ref>
<pre>
map.resources :products, :member => {:short => :post},
:collection => {:long => :get} do |products|
  products.resource :category
end
</pre>
and now it looks like:
<pre>
resources :products do
  resource :category
 
  member do
    post :short
  end
 
  collection do
    get :long
  end
end
</pre>
As you can see, it looks very similar to Ruby syntax, which becomes cleaner and easier to understand.
==== Regular Route ====
Here is an example of how regular route looks like in Rails 2:
<pre>
map.connect 'products/:id', :controller => 'catalog', :action => 'view'
</pre>
Instead of defining keys for controller and action, you can now do:
<pre>
match 'products/:id' => 'catalog#view'
</pre>
which is less verbose and much simpler.
==== Empty Route ====
Empty route can be used to route to the root of the web site. Rails 2 uses
<pre>
map.root :controller => "welcome", :action => 'show'
</pre>
which has been now simplified to
<pre>
root :to => 'welcome#show'
</pre>
==== RESTful Routes ====
The new RESTful route is one of the nicest enhancements in Rails 3 for developers. Let’s consider the Photos example <ref name="refRails1"/> below. By simply calling
<pre>
Resources :photos
</pre>
the basic routes including index, new, create, show, edit, update and destroy  will be created automatically for you, and mapped to the PhotosController in this case. Here is a table that can provide you more details about these seven routes.
[[File:PhotoExampleTable.jpg]]
==== More RESTful Routes ====
If you want to add routes in addition to the seven routes above, you may add these routes by creating member routes or collection routes.<ref name="routeref"/>
===== Member Route vs Collection Route =====
First, what is the difference between member route and collection route? The difference is that a member route requires an ID and acts on a single object, while a collection route acts on a collection of objects instead. For example, the Show route in the above example can be considered as a member route because it takes an id and displays a specified photo; the Index route can be considered as a collection route because it builds on a collection of photos and used to display all photos.<ref name="routeref">"Difference between collection route and member route in ruby on rails" http://stackoverflow.com/questions/3028653/difference-between-collection-route-and-member-route-in-ruby-on-rails</ref>
===== Adding Member Routes =====
To add a member route, just simply add a member block into the resource block. For example,
<pre>
resources :photos do
  member do
    get 'preview'
  end
end
</pre>
Doing this will recognize //photos/:id/preview with GET, and route to the preview action of the PhotosController. You can also do:
<pre>
resources :photos do
  get 'preview', :on => :member
end
</pre>
===== Adding Collection Routes =====
To add a collection route, do
<pre>
resources :photos do
  collection do
    get 'search'
  end
end
</pre>
Doing this will recognize //photos/search with GET, and route to the search action of the PhotosController. You can also try
<pre>
resources :photos do
  get 'search', :on => :collection
end
</pre>
For more information regarding Rails route, please refer to [http://yehudakatz.com/2009/12/26/the-rails-3-router-rack-it-up/ link].<ref>Katz, Yehuda (December 26, 2009) "The Rails 3 Router: Rack it Up" http://yehudakatz.com/2009/12/26/the-rails-3-router-rack-it-up/</ref>
== Recommended Reading ==
<ol>
<li>Ruby, S., Thomas, D., Hansson, D. H. (2011).  <i>Agile Web Development with Rails, 4th Edition.</i></li>
</ol>


==References==
==References==


<references/>
<references/>

Latest revision as of 02:47, 22 September 2011

Rails 2 vs. Rails 3

Introduction

There are many changes involved when you migrate your Rails application from Rails 2 to Rails 3. If your application is a based on Rails 2, there are important changes you'll need to make to run your application in Rails 3.<ref name="refone">Carletti, Simone. "The Road to Rails 3: make your Rails 2.3 project more Rails 3 oriented" http://www.simonecarletti.com/blog/2010/07/the-way-to-rails-3/</ref>. Rails 3 is a result of the merge between Rails and Merb. Merb is famous for honoring agnosticism and Rails has a long history of providing rock-solid defaults. We’ll see how Rails 3 hits a sweet spot in being an opinionated and agnostic framework at the same time, resulting in a framework that’s sure to be appreciated by developers of both camps. <ref name="Upgrading a Rails 2 App to Rails 3">Ruby. http://www.railsdispatch.com/posts/upgrading-a-rails-2-app-to-rails-3/</ref> There are additional changes planned for Rails 3.1 and Rails 3.2 that you should consider now if you're migrating from Rails 2 to Rails 3.<ref name="reftwo">Naik, Pratik. "Active Record Query Interface 3.0" http://m.onkey.org/active-record-query-interface</ref> A variety of these changes, including changes covered in class, are covered in the sections below.

Differences between Rails 2 and Rails 3

The differences between Rails 2 and Rails 3 are probably best understood by the categories of changes required to make your Rails 2 application work in a Rails 3 environment. The following categories address some of these changes.

Prerequisites

In any major version upgrade of software there are likely to be prerequisites. Rails is no different and there are a few items that you'll need to consider. These prerequisites include the following:<ref name="refone"/>

  • Make sure you have unit, functional and integration testing already implemented in your application before porting it to Rails 3.<ref>"Ruby on Rails Guides: A Guide to Testing Rails Applications" http://guides.rubyonrails.org/testing.html></ref>
  • Rails 3 incorporates string escaping. This can break your view helpers, so they will need to be reviewed and tested.<ref name="refone"/>
  • Upgrade your Ruby software to at least version 1.8.7 or skip to 1.9.2. Other versions do not work or do not work properly.<ref name="refthree">"Ruby on Rails Guides: Ruby on Rails 3.0 Release Notes" http://edgeguides.rubyonrails.org/3_0_release_notes.html</ref>

Mandatory Changes

Even after prerequisites are met there are mandatory changes introduced by updates that obsolete certain features or capabilities. Again Rails 3 is no different in this respect.<ref name="refone"/>

  • The standard for managing Gem dependencies is called Bundler<ref>"Bundler: The Best Way to Manage Ruby Applications" http://gembundler.com/</ref>. This is backwards compatible with Rails 2.3 so you can implement this prior to migrating to Rails 3.<ref>"Using Bundler with Rails 2.3" http://gembundler.com/rails23.html</ref>
  • Rails 3 is JavaScript framework agnostic and is no longer prototype-oriented.<ref name="refone"/> As a result, there are changes that require attention.<ref>Carletti, Simone (June 2010). "Unobtrusive JavaScript in Rails 3" http://www.simonecarletti.com/blog/2010/06/unobtrusive-javascript-in-rails-3/</ref>
  • Object#returning has been removed and you should begin using Object#Tap.<ref name="refone"/>
  • Make sure your YAML files with embedded HTML have a key that ends in _html or the HTML will be escaped.<ref name="refone"/>
  • The Rails Metal feature has been removed.<ref name="refone"/>
  • You can only have ActiveRecord fixtures in the test/fixtures folder.<ref name="refone"/>
  • Rails helpers for input, form, error_messages_for and error_message_on have been removed.<ref name="refone"/>. A plugin called dynamic_form is available to continue using this functionality.<ref>"rails/dynamic_form - GitHub" https://github.com/rails/dynamic_form</ref> However, there is another method by Ryan Bates to accomplish these features without using a plugin.<ref>Bates, Ryan. "Validations in Rails 3" http://railscasts.com/episodes/211-validations-in-rails-3</ref>

Optional Changes

Several constants available in Rails 2 have been changed in Rails 3. These constants are RAILS_ROOT, RAILS_ENV, and RAILS_DEFAULT_LOGGER. The new constants are Rails.root, Rails.env and Rails.logger, respectively.<ref name="refone"/>. Simone Carletti identifies other optional changes that you may need to make.

For purposes of this class, the next section identifies changes between Rails 2 and Rails 3 that were identified in class.

Other Changes?

Have all the changes been identified here? Probably not. There are a variety of references available on the Internet that address changes from Rails 2 to Rails 3. Some are identified in the References section below, and some are identified here:

You can use Google search to identify additional articles with change information.

Example Code

Active Record Query Interface for Rails 3

At this point you may have discovered some of the great functionalities that come with Rails 3. But when you start to switch from Rails 2 to Rails 3, you may find warning messages or even errors in some of your existing methods. That is because in Rails 3, all of the internals, especially the ActiveRecord interface, were updated extensively, which makes the Rails modularity framework much cleaner and more extensible for developers to use. <ref>"Is Rails 3.0 a Game Changer?" http://lindsaar.net/2010/2/4/is_rails_3_a_game_changer</ref> Because of this, some of the methods in Rails 2 are now deprecated or even fully removed, which causes warning messages or errors when compiling the old code. Below is a list of these deprecated methods in the ActiveRecord interface.

The find([:all | :first | :last]) Method

The find(*args) method in the Active Record interface allows user to retrieve objects from the database. The user has different ways to retrieve objects, for example, they can retrieve only the first or the last object of the table, or just one object by its primary id, or all of the objects at once. These methods follow the syntax of find(:all), find(:first) or find(:last)in Rails 2. However in Rails 3, they are now deprecated and have been converted to all, first, and last alternatives. See the following example for comparison:

# the deprecated version
@categories = Category.find(:all)
@first_category = Category.find(:first)
@last_category = Category.find(:last)

# the good version
@categories = Category.all
@first_category = Category.first
@last_category = Category.last

The find(*args, OPTIONS) Method

In Rails 3.1, ActiveRecord methods that have OPTIONS as an argument are also deprecated and will be removed in Rails 3.2. Passing option hashes include :conditions, :include, :joins, :limit, :offset, :order, :select, :readonly, :group, :having, :from, :lock. So what is the replacement for this find(*args, options) method? The answer is inside the new Rails 3 API. The new Rails 3 API has the following new finder methods to replace with the find(*args, options) method.<ref name="reftwo"/>

  • where (:conditions)
  • having (:conditions)
  • select
  • group
  • order
  • limit
  • offset
  • joins
  • includes (:include)
  • lock
  • readonly
  • from

For example, in Rails 2 you used to do

# the deprecated version
@desert_categories = Category.find(:all, :conditions => {:name => "Desert"})
@two_categories = Category.find(:all, :limit => 2)
@ordered_categories = Category.find(:all, :order => “created_at desc”)

But in Rails 3, you should now do

# the new version
@desert_categories = Category.where(:name=>"Desert")
@two_categories = Category.limit(2)
@ordered_categories = Category.order("created_at desc")

Furthermore, all of the above finder methods are defined on the Relation object, which gains the ability of chainability. In other words, all these methods can be chained together for use. This is a very powerful feature because it allows you to define multiple conditions in just one line of finder statement, which makes developers’ life so much easier. For example, if you want to return the 10 newest Desert recipes in descending order based on the creation date, you can do

@recipes = Recipe.where(:category_name => “Desert”). order("created_at desc").limit(10)

The named_scope Method

The named_scoped method is also deprecated. But to fix it, all you need to do is to rename named_scope to scope. <ref name="refthree"/> For instance, a definition like :

class Category
     name_scope :desert, :conditions => {:name => “Desert”}
     name_scope :fruit, :condition => {:name => “Fruit”}
end

will become :

class Category
     scope :desert, :conditions => {:name => “Desert”}
     scope :fruit, :condition => {:name => “Fruit”}
end 

However, since using options hash is deprecated in Rails 3.1, therefore the new finder methods should be used as below:

class Category
     scope :desert, where {:name => “Desert”}
     scope :fruit, where {:name => “Fruit”}
end 

At the end when you call these named scopes, you can simply do

desert = Category.desert
fruit = Category.fruit

The New DSL in Rails 3 Router

The Rails router is used to recognize URLs and dispatch them to a controller’s action. It can also generate paths and URLs, avoiding the need to hardcode strings in the views. <ref name="refRails1"> "Rails Routing from the Outside In" http://edgeguides.rubyonrails.org/routing.html </ref> In Rails 3, other than handing basic routes in the old Domain Specific Langauges (DSL), the new DSL has some advanced features that every developer will appreciate.

Comparing with the old DSL in Rails 2, the new DSL takes less keystroke and is more readable. For example, here is how DSL used to look in Rails 2: <ref>"Revamped Routes in Rails 3" http://rizwanreza.com/2009/12/20/revamped-routes-in-rails-3</ref>

map.resources :products, :member => {:short => :post},
:collection => {:long => :get} do |products|
  products.resource :category
end

and now it looks like:

resources :products do
  resource :category
  
  member do
    post :short
  end
  
  collection do
    get :long
  end
end

As you can see, it looks very similar to Ruby syntax, which becomes cleaner and easier to understand.

Regular Route

Here is an example of how regular route looks like in Rails 2:

map.connect 'products/:id', :controller => 'catalog', :action => 'view'

Instead of defining keys for controller and action, you can now do:

match 'products/:id' => 'catalog#view'

which is less verbose and much simpler.

Empty Route

Empty route can be used to route to the root of the web site. Rails 2 uses

map.root :controller => "welcome", :action => 'show'

which has been now simplified to

root :to => 'welcome#show'

RESTful Routes

The new RESTful route is one of the nicest enhancements in Rails 3 for developers. Let’s consider the Photos example <ref name="refRails1"/> below. By simply calling

Resources :photos

the basic routes including index, new, create, show, edit, update and destroy will be created automatically for you, and mapped to the PhotosController in this case. Here is a table that can provide you more details about these seven routes.

More RESTful Routes

If you want to add routes in addition to the seven routes above, you may add these routes by creating member routes or collection routes.<ref name="routeref"/>

Member Route vs Collection Route

First, what is the difference between member route and collection route? The difference is that a member route requires an ID and acts on a single object, while a collection route acts on a collection of objects instead. For example, the Show route in the above example can be considered as a member route because it takes an id and displays a specified photo; the Index route can be considered as a collection route because it builds on a collection of photos and used to display all photos.<ref name="routeref">"Difference between collection route and member route in ruby on rails" http://stackoverflow.com/questions/3028653/difference-between-collection-route-and-member-route-in-ruby-on-rails</ref>

Adding Member Routes

To add a member route, just simply add a member block into the resource block. For example,


resources :photos do
  member do
    get 'preview'
  end
end

Doing this will recognize //photos/:id/preview with GET, and route to the preview action of the PhotosController. You can also do:

resources :photos do
  get 'preview', :on => :member
end
Adding Collection Routes

To add a collection route, do

resources :photos do
  collection do
    get 'search'
  end
end

Doing this will recognize //photos/search with GET, and route to the search action of the PhotosController. You can also try

resources :photos do
  get 'search', :on => :collection
end

For more information regarding Rails route, please refer to link.<ref>Katz, Yehuda (December 26, 2009) "The Rails 3 Router: Rack it Up" http://yehudakatz.com/2009/12/26/the-rails-3-router-rack-it-up/</ref>

Recommended Reading

  1. Ruby, S., Thomas, D., Hansson, D. H. (2011). Agile Web Development with Rails, 4th Edition.

References

<references/>